100875 Hytec Work Supports Spring Advance 1,300 lbs. Capacity UPC #662536238090
Part #100875 Hytec Work Supports Spring Advance 1,300 lbs. Capacity
Hytec’s spring advance work supports have a spring loaded plunger which contacts the workpiece as it is loaded into the fixture. The spring keeps the plunger in contact with the workpiece, allowing for variations between workpieces. To support any externally supplied loads, the sleeve surrounding the poppet grips the plunger and holds it in place.
The 100874 and 110124’s threaded body may be compactly manifold mounted in your fixture or choose the 100875 or metric version 110134 which includes the 100874 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.
Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035 for conventional mounting, and 421727 for manifold mounting.
Features:
- 1,300 lbs. capacity @ 5,000 psi maximum
- Fully corrosion resistant construction
- Manifold mount or conventional base mounting
- Filtered breather/rest button
- 1,000 psi minimum recommended pressure
Order NO. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100875 | 1,300 | 0.01 | Spring | Base Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||||
M | N | P | Q Pressure Port Thread Size |
R Port Angle |
†† S Dia. |
Operating Range | ||
W Retracted |
X Advanced |
|||||||
100875 | 1.000 | 0.700 | 0.385 | 7/16 - 20 UNF SAE-4 | 5° | 1.688 | 3.162 | 3.474 |
NOTE: †† 1.768 dia. min. clearance required. |
Order No. |
Dimensions (In Inches) | ||
T |
U |
V Dia. |
|
100875 | 1.750 | 2.562 | 0.281 |
Order No. |
MANIFOLD MOUNT DETAIL | ||||||
AA Thread Size |
BB Min. Thread |
CC | DD Dia. |
EE Drill Point Dia. Max. |
FF Dia. |
GG Max. |
|
100875 | - | - | - | - | - | - | - |
Order No. |
MANIFOLD MOUNT DETAIL | |||||
HH | JJ | KK Thread Size |
LL | MM | NN Pressure Port Dia. Max. |
|
100875 | 1.968 | 1.188 | 1/4 - 20 UNC | 1.456 | 0.594 | - |
NOTE: |
AIR ADVANCE WORK SUPPORT |
||
Order No. |
Approximate Forces Required To Depress Plunger (lbs.) |
|
* Air Pressure (psi) | Force (lbs.) | |
100875 | 2.3 | 2.9 |
Manufacturer | SPX Hytec |
---|
-
100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005746Special Price $800.64 was $899.60
-
100873 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236560Special Price $742.71 was $834.51
-
110125 Hytec Spring Advance Work Supports 4,000 lbs. Capacity UPC #662536372565Special Price $868.47 was $973.08
-
100872 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236348Special Price $625.85 was $703.20
-
100141 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005296Special Price $802.69 was $901.90
-
100877 Hytec Air Advance Work Supports 1,300 lbs. Capacity UPC #662536238113Special Price $879.23 was $987.90
-
100876 Hytec Air Advance Work Supports 1,300 lbs. Capacity UPC #662536238106Special Price $688.95 was $774.10