100884 Hytec Work Supports Spring Advance 4,000 lbs. Capacity UPC #662536254236
Part #100884 Hytec Work Supports Spring Advance 1,300 lbs. Capacity
Hytec’s spring advance work supports have a spring loaded plunger which contacts the workpiece as it is loaded into the fixture. The spring keeps the plunger in contact with the workpiece, allowing for variations between workpieces. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.
The 100884’s threaded body may be compactly manifold mounted in your fixture or choose the 100885 which includes the 100884 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction. Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminate inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00004" per 100 lbs. of load. For base only, order number 500028 for conventional mounting, and 421728 for manifold mounting.
Features:
- 4,000 lbs. capacity @ 5,000 psi maximum
- Fully corrosion resistant construction
- Manifold mount or conventional base mounting
- Small filtered breather/rest button to accommodate intricate workpieces
- 1,000 psi minimum recommended pressure
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100884 | 4,000 | 0.02 | Spring | Cartridge Manifold |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
A | B † Seal Dia. |
C | D | E Hex. |
F Dia. |
|
100884 | 2 1/4 - 16 UN | 2.140 | 0.250 | 1.625 | 2.000 | 0.735 |
† Seal included. |
Order No. |
Dimensions (In Inches) | |||
Operating Range | K | L Sea |
||
H | J | |||
100884 | 3.265 | 3.765 | 2.312 | 0.040 |
Order No. |
Dimensions (In Inches) |
G Hex. |
|
100884 | 0.688 |
Order No. |
Mounting Dimensions (In Inches) | ||||
AA Thread Size |
BB Min. Thread |
CC | DD Dia. |
EE Drill Point Dia. Max. |
|
100884 | 2 1/4 - 16 UN | 0.380 | 0.560 0.580 |
2.182 2.196 |
0.500 |
Order No. |
Mounting Dimensions (In Inches) | |||
FF Dia. |
GG Max. |
HH | JJ Max. |
|
100884 | 0.080 0.100 |
2.145 2.155 |
0.121 0.293 |
2.182 2.196 |
Order No. |
Mounting Dimensions (In Inches) | |||||
KK | LL | MM Thread Size |
NN | PP | RR Pressure Port Dia. Max. |
|
100884 | - | - | - | - | - | - |
NOTE: Finish area to be 0.438 dia. min. centered on 0.126 dia. port hole. See operating instructions for additional details. |
Manufacturer | SPX Hytec |
---|
-
110085 Hytec Spring Advance Work Supports 2,100 lbs. Capacity UPC #662536364935Special Price $476.81 was $534.24
-
100176 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536005395Special Price $490.05 was $549.08
-
100885 Hytec Work Supports Spring Advance 4,000 lbs. Capacity UPC #662536254243Special Price $1,043.70 was $1,172.70
-
110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536364942Special Price $490.05 was $549.08
-
100229 Hytec Spring Advance Work Supports 2,100 lbs. Capacity UPC #662536005760Special Price $459.78 was $515.16
-
100269 Hytec Spring Advance Work Supports 2,100 lbs. Capacity UPC #662536005876Special Price $537.36 was $602.08
-
100177 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536005401Special Price $535.46 was $599.96