Blow Guns

ARTICLE INDEX

Pneumatic blow guns are used in cleaning and/or drying, and they are powered by high pressured air, typically by a shop air compressor. They are effective in cleaning construction sites, work shops, car washes, roads and many more applications. They are also used by firms that produce metal shavings, powders, and sawdust during manufacturing. The air powerfully blows away particles. They are easy to use, but must be operated carefully. Industrial cleaning must be done with safety measures in place; otherwise, it can lead to injuries. 

Blow guns can be eco-friendly and an efficient way to get work done fast and perfectly. There are professional grades of blow guns, and the operator must be trained and qualified to handle them. Most of them come with aluminum or stainless steel nozzles. They are designed with a user friendly design to enhance the safety of the operator. 

Blow guns direct and control pressurized air or fluid. Though most of them are used in cleaning and drying various parts, there are others adapted for various applications including accessing limited space enclosed areas, and they come with compatible nozzles. 

The pneumatic blow gun is used in blowing parts that need cleaning, drying, etc. When the button is pressed (or the handle is squeezed), the air is released with strong force. It can be dangerous if not used properly, and you must get a good quality one to prevent injuries. A safe blow gun comes with limited output pressure. 

Blow guns are part of most factories’ daily activities. They are used in removing contaminants like liquids, small fine pieces of metal, and dust. They are mostly found in fabrication facilities, electronic plants, assembly plants, machine shops, car washes, spray down facilities and much more. These guns use technology to blow and they support low usage of energy and meet environmental credentials. 

A good air and fluid gun should not be heavy and must be suitable for all users. Sometimes it is difficult to use some brands because they are only meant for right handed users. However, most manufacturers are now creating advanced handles, making it possible for everyone to use them. 

Some blow guns have adjustable flow controls, but pressure is typically regulated by the “regulator”. If the nozzle is adjustable, adjustments enables you change the flow depending on your needs. The noise is reduced by disconnection of an integrated adapter or steel nipple because it vents down the pressure of the stream. 

The air and fluid guns have a strong blowing force that cleans surfaces effectively. The flow settings enable effective cleaning. The controls are comfortable and can be changed from a narrow jet to a wide beam. It depends on your work’s needs. All air and fluid guns meet safety standards set by OSHA. The gun can handle air and fluids that are non-explosive. Depending on the brand you choose to buy or your application requirements, you can get blow guns with noise reduction and different flow features. 

Some of these blow guns are made specifically for tasks that require high pressure and temperature. These guns must have the OSHA gauge to ensure the safety of users. 

Multiflow air and fluid guns are tools that meet modern technology needs. Blow guns are controllable and created by professional engineers ensuring that they complete the intended task perfectly. These types of blow guns are used to produce extremely powerful fluid or air to clean, dry or cool applications. They are convenient, and the nozzle allows adjustments of a narrow jet to a wide beam. They are made with a non-slip grip to ensure that the user is safe. The grip is molded rubber and enables the user to hold it tightly and comfortably.

By adjusting the flow settings, the user can achieve a flow that suits the work. These tools are versatile and can be used in various tasks. It is an important tool for professionals who want to do a perfect job. The Multiflow air and blow gun is made to last for years despite rough handling on a daily basis. The material used in making these guns enables them to last, in spite of being dropped or mishandled by the operators.

These guns clean surfaces that need to be free of liquids and air. However, the buyer must choose the right one. Anyone who is not sure about the best blow gun for their task should always ask for help.

The Multiflow air and fluid guns have the following technical details:

• High flow  

They produce powerful air, which goes up to 1,200 liters per minute. It cleans using air or liquids 

• Strong design  

The guns are made of strong polyoxymethylene, and they do not wear out even with repeated use. 

• Variable Flow control 

They come with settings that allow for adjustment to the exact flow needed for a specific task. For repeated applications, the user can save the settings if they require uniform flow all the time to do their work. 

• The anti-whip control 

The integrated adapter or steel nipple reduces the flow pressure when disconnected and enhances the safety for the user. This also lessens noise and hose whip, which can cause discomfort or even injuries. 

A Typhoon blow gun looks like a pistol and comes with a unique design. It is strong and powerful, which makes it generate incredibly high air flow. The tip gives a volume of 34 CFM and 21 pounds of thrust. It is made of tough material, die cast zinc that never wears out. The hooks ensure that this tool is available whenever needed for work. The maximum input for this type of blowgun is 150 psi. This type of gun meets the standards set by OSHA, and the operator is assured of safety. However, they must wear protective clothes when using it. 

The pocket blow gun is the easiest to carry around. It can be carried in a shirt’s pocket or in the back trouser’s pocket. It is twisted to activate flow, and plant managers who move most of the time around their work place appreciate its mobility. 

Its features are outstanding, and apart from being portable, it has an integral connector. Unlike other blow guns, it’s twisted to get activated. Its maximum pressure is 150 psi. It is one of the simplest blowguns, yet effective just as the others. 

The cannon high volume gun has a 48 inch nozzle tip that gives concentrated force on a small area. It is efficient and excellent for stubborn debris. It is made of aluminum and stainless steel, which makes it durable and perfect for difficult jobs. There are a number of models among the Cannon high volume guns. Cannon common accessories include nozzles, triggers, adapters and extensions. 

This is the best model when the user wants a focused and strong stream of air. They are most suitable for cleaning and removing stubborn debris. This type of nozzle is safe and works perfectly in building and road construction job sites. It gives a concentrated airstream that cleans debris from all corners. However, it must be handled with care to avoid injuries as the air is very strong and pointed at a single spot. 

Multi-Jet models are suitable for blowing a wide area. They are suitable for cleaning concrete and road surfaces. It is safe and excellent for job sites. It comes with an extension and pipe that make it easy to move around. The air comes out in a broad way that sends debris flying away from the roads, floors and walkways. They come with a number of nozzles arranged properly to give powerful jet-like spray cleaning over the entire area, finishing up the task quickly. 

Hydraulic blow guns come in different models and are manufactured by various industrial companies. They are made using long lasting material that will help withstand dangerous events from occurring, but that doesn’t fully prevent accidents when working with them. These guns can be dangerous, especially if the pressure is blocked. To avoid this, blow gun operators should always avoid any blockages and have the blow guns checked regularly. 

With pneumatic blow guns, most accidents occur due to mishandling of the compressed air. A carless act, such as directing an air jet to a colleague can cause disastrous results. It can lead to internal injuries and even death. Proper handling of compressed air in blow guns is extremely important. Also, choosing a blow gun with the right decibel range is important. The noise from a high decibel blow gun can be deafening and end up violating standards set by OSHA. You might need to make sure your do not exceed those values. 

The most problematic result of mishandling is that this air can get into the body through a scratch or even puncture on the skin, rectum, ear and nose. This causes swelling accompanied by a lot of pain. The air can find its way into the bloodstream and cause an embolism. This simply refers to the blockage of a blood vessel, which in this case is caused by an air bubble. It is a dangerous condition because it leads to an artery embolism or bursting of a brain vessel. The affected person may die, enter a coma or get paralyzed. The extent of damage depends on the location, size and duration of the bubble in the body. When using blow guns, the operator and other people around the workplace must be protected from the air. There are also specially designed tips to prevent these injuries from occurring. 

Another factor that causes injuries is the small particles blown by blowguns. The compressed air is strong enough to blow filings, fine pieces of metal, shavings and particles into the ears, eyes and skin of anybody standing nearby. The force makes them penetrate into the body easily. 

In addition, the compressed air can contaminate the air if used to clean dust particles in the air. It becomes a respiratory hazard and should not be used directly to the air at all times. This is the most common mistake and one that affects innocent bystanders. 

People who know nothing about compressed air should not use blow guns. It is unfortunate that most people think they are harmless and end up getting into a mess or dying. 

• Operators should not at anytime direct the blow gun at other people, whether to blow dirt from their clothes or as a game. 

• The operator must wear protective gear including heavy goggles before cleaning with the blow gun. 

• Let the blow gun have the safe air nozzle and place screens to prevent hurting others. 

• Other workers must be alerted when air gun is at work especially when cleaning a large space. 

• Check the guns regularly, or have them examined by an engineer to prevent accidents. 

• Check the nozzles before beginning a task. They must be tightly fastened. 

• Be careful not to bend the hose, which can stop the air from flowing smoothly. This can cause an explosion and injuries to the operator. 

• If using extensions, make sure the hoses do not lay where other people can trip and cause accidents. The best way to handle the extensions is to have them at a high height where they will not interfere with the movement of people, tools or vehicles. 

• Remember all blow guns must be handled like professional tools. They make work easy for you, but at the same time can be fatal if mishandled. 

There are requirements set by OSHA to prevent injuries when working with blow guns. Since the main causes of harm are airborne particles and pressure, the operator must wear protective gear with pressure that goes beyond 30 psi. The particle guarding gear must prevent all chips regardless of their size from reaching the eyes, ears and the skin. A protective cone air nozzle helps to protect the operator of the blowgun. Barriers, screens and baffles are important to protect other people working near the area being cleaned. Every state has its state regulations and while some are extremely strict, others are a bit lenient. But, the safety of the blowgun operator and fellow workers must be provided. 

Operators of blow guns must never try to come up with short cuts to get their work done faster. Some people use the blow gun with compressed air to get rid of dusts from their clothes instead of doing it manually. This dangerous because the pressure may be too high and if the victim has an opening on the skin, the air will enter into the body. This can lead to health complications and sometimes death. 

The users of blow guns must never try to modify the tools. Get another that can suit the task at hand if the current one does not yield desired results. 

Blow guns come in different types. Each model has its benefits and special features. However, there are some basic ones without any fancy features. They get a simple job done fast and smoothly. Any heavy duty job calls for an advanced hydraulic blowgun. Sometimes a blow gun operator needs a kit to accompany the tool for different applications. The kits are made specifically to suit a particular industry or application. Do not just go for any model; be sure to consider the following. 

Choosing the right blow gun depends on the task ahead. The different types of hydraulic blow guns in the market are made for different roles. Though the first two things to think about include blowing power and price; however, the price is not a main factor to consider. For instance, some jobs call for powerful blowing power, and it will be useless to get something less. When buying a blow gun, you must check the information about the product usually given by the manufacturer. This is the only way you can tell how the tool functions. 

This is an important part of the blow gun. Some come with a lot of noise, while others have low noise levels. Also, the power needed will determine the nozzle to use. Each nozzle is made to meet specific needs. A good example is the star shaped coanda made specifically to dry and clean small spaces; it cannot dry or clean large spaces. The venturi nozzle works in different applications but cannot do cavity cleaning as well. 

Nozzles come in several types and they include: 

• Safety air nozzle. 

Safety nozzles are recommended to prevent build up if the nozzle is blocked. There are a variety of safety tips such as a safety booster tip and a safety tamper-proof tip, as well as a wire tube brush if high pressure air is not enough to remove stubborn grime. 

• Straight  

This is the easiest nozzle to use, and it produces upstream pressure. But, the operator needs a 200kPa regulator preset. 

• Star Shaped Coanda  

This nozzle looks like a cone and has several openings. The air goes through the openings. 

• Safe straight  

This one looks like the straight nozzle, but it has some openings on the side. It also comes with pressure regulator. 

• Flat  

This is excellent when an operator wants to blow a wide surface area. 

If the blow gun is very noisy, it is likely to cause disturbance in the entire area where the work is being done. It is wise to go for a blow gun that has a silencer to avoid too much noise. 

To lower the costs of using blow guns, the buyer should go for air nozzles, which reduce the consumption of air. The nozzle is made specifically for a particular blow gun, and it brings high velocity air, which cleans and blows efficiently  

With the right choice, one can find a blow gun that will do all cleaning and debris removal jobs as required. The market has many high quality and popular blow guns that meet the OSHA standards. 

In addition to the safety recommendations mentioned earlier, the best blow gun should have a quiet nozzle. It emits low noise and does disturb people around the operator. The nozzle pressure should be below 10 psi, and the operator must wear protective gear at all times. Some of the laws that govern the use of blowguns include: 

• When using the compressed air to clean a surface, the operator must make sure that the blow gun is approved for the task and adhere to the specifications given by the manufacturer. 

• It must be certified for the purpose the operator intends to use the blow gun for. 

• Workers must not be endangered. Protective gear must be worn by the operator of the blow gun. 

• The operator shall not use the blow gun for any job other than what it’s made specifically to do. 

When using blow guns for jobs such as air cleaning, the hazards must be reduced. This is done by making all possible adjustments, for example: 

• Use of particle guards that prevent flying debris and chips from reaching people. 

• Use of extension tubes to provide the operator a safe working distance. 

• Using blow guns that are equipped with bags to collect the particles. 

• Ensuring that the blow gun is in good condition to function properly. 

Hydraulic blow guns are an essential part of many businesses, including construction sites, mechanic shops, wood shops, bakeries and assembly lines. They are used in many ways, from complicated tasks, to simple ones. They clean surfaces, inflate tires, dry surfaces and much more. It is almost impossible for many firms, especially those in the manufacturing industry to manage without blowguns. 

Since they are made of different materials, it is important to go for a high quality one. Some blow guns are lever operated while others are just button operated. The nozzles are numerous: there is needle tip, rubber tip, high flow and the safety nozzles. However, at the end of the day, the blow guns come made to fit their specific roles. There is no way you can interchange them and expect desired results.