Drain Units

Click here to skip forward to view Filters, Regulators, and Lubricators

Drains – Remove Water from Compressed Air Systems

Desiccant dryers are convenient. But there are compressed air systems, especially those with long runs where they may just get overwhelmed by the drying task. Where there is normally a significant water build-up within the air line, Coilhose Pneumatics has a line of Mechanical Condensate Drains and Solid State Automatic Drains that are far more effective at removing water from your compressed air systems.

Mechanical Condensate Drains use a float switch to gather up and drain up all the built-up condensation. These drains can automatically drain water from Compressor Tanks, Coolers, and Drop legs. A manual overdrive allows for automatic draining between automatic functions.

Solid State Automatic Drains, on the other hand, open the drain valve at periodic intervals to release any built-up condensation. With a cycle time of 1 - 45 minutes, solid state automatic drains can be used to drain compressor tanks by plumbing them directly under the tanks, or to drain a series of condensation drops. These drains can also be cycled manually.

Click here get back to the Top