100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005746-Top View

100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005746

100873 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236560- Top View

100873 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236560

100872 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236348

Part #100872 Fluid Advance Work Supports 1,300 lbs. capacity at 5, 000 psi maximum recommended pressure 1,000 psi min. Manifold or conventional base mounting, Filtered breather/rest button.
Special Price $625.85 was $703.20
SKU
100872
100872 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236348 is available to buy in increments of 1

Part #100872 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity


Hytec’s fluid advance work supports have a spring loaded plunger which hydraulically extends to contact the workpiece. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.

Fluid advance work supports allow the plunger to be retracted out of the way during workpiece load/unload operations. The work support provides its own internal sequencing of a piston which gently raises the plunger until it contacts the workpiece. A spring between the piston and the plunger limits the workpiece contact force.

The 100872’s threaded body may be compactly manifold mounted in your fixture or choose the 100873 which includes the100872 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.

Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035.



Features:

  • 1,300 lbs. capacity @ 5,000 psi maximum
  • Fully corrosion resistant construction
  • Manifold or conventional base mounting
  • Filtered breather/rest button
  • 1,000 psi minimum recommended pressure

 

Order NO. Cap. *
(lbs.)
Oil Cap.
(cu. in.)
Max.
Flow Rate
(cu. in./min.)
Advance
System
Mounting
Configuration
100872

1,300 0.04 47 Fluid Cartridge Manifold
* Based on 5,000 psi max. operating pressure

 

FLUID ADVANCE WORK SUPPORT
Order NO. Approximate Forces Required
To Depress Plunger (lbs.)
Fully
Extended
Fully
Depressed
100872 2.3 2.9

 

 

Order
No.
Dimensions (In Inches)
A B †
Seal
Dia.
C D E
Hex.
F
Dia.
100872 1 1/4 - 16 UN 1.171 0.334 1.531 1.125 0.735

 

Order
No.
 
G
Hex.
Operating Range K L
Seal
H J
100872 0.688 2.850 3.162 2.180 0.040

 

 

Order
No.
Dimensions (In Inches)
G
Hex.
100872 0.688

 

 

Order
No.
Mounting Dimensions (In Inches)
AA
Thread
Size
BB
Min.
Thread
CC DD
Dia.
EE
Drill Point
Dia. Max.
FF
Dia.
GG
Max.
100872 1 1/4 - 16 UN 0.300 0.655
0.675
1.182
1.196
0.500 0.121
0.135
0.343

 

 

Order
No.
Mounting Dimensions (In Inches)
HH JJ KK
Thread
Size
LL MM NN
Pressure Port
Dia. Max.
100872 - - - - - -
More Information
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:100872 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236348
More from SPX Hytec