100176 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536005395
Part #100176 Hytec Air Advance Work Supports - 2,100 lbs. Capacity, Air advance, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$490.05
was
$549.08
SKU
100176
100176 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536005395 is available to buy in increments of 1
Part #100176 Hytec Air Advance Work Supports - 2,100 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 2,100 lb. air advanced work supports are available in three different models with either conventional or manifold mounting. All use plunger seals to protect against contamination.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Air advance
- 2,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order No. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100176 | 2,100 | 0.100 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. | Dimensions (In Inches) |
||||||
A Retract Operating Range |
B Advance Operating Range |
C | D | J | N |
P Air Inlet |
|
100176 | 2.250 | 2.625 | 2.250 | 3.542 | 0.875 | 0.685 | 1/8 NPTF |
Order No. | Dimensions (In Inches) | |||
E | G Dia. |
L | Q Port |
|
100176 | 1.750 | 0.500 | 1.375 | 1/4 NPTF |
Order No. |
Dimensions (In Inches) | |||||
F | H | K |
M Thread |
R Dia. |
||
Size | Depth | |||||
100176 | 0.875 | 0.438 | 0.625 | 1/4-20 UNC | 0.312 | 0.281 |
Order No. | Dimensions (In Inches) | |||||
S | T | U |
V Thread |
W Dia. Air |
Y Dia. |
|
100176 | - | - | - | - | - | - |
Order No. | Dimensions (In Inches) | |
Y | Z | |
100176 | - | - |
AIR ADVANCE WORK SUPPORT | ||
Order No. | Approximate Forces Required To Depress Plunger (lbs.) |
|
Air Pressure * (psi) |
Force (lbs.) |
|
100176 | 30 | 2.2 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 50 psi. |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
100965 Hytec Double-Acting Swing/Pull Clamp - Manifold Mount - Upper Flange Style UPC #662536302722Special Price $742.65 was $832.10
-
100896 Hytec Single-Acting Swing/Pull Clamp - Manifold Mount - Upper Flange Style UPC #662536273923Special Price $902.02 was $1,013.50
-
100964 Hytec Double-Acting Swing/Pull Clamp - Manifold Mount - Upper Flange Style UPC #662536302715Special Price $1,018.87 was $1,144.80
-
100903 Hytec Swing/Pull Clamps - Threaded Body Style - 5000 lbs UPC #662536277297Special Price $1,121.40 was $1,260.00
-
100901 Hytec Swing/Pull Clamps - Threaded Body Style - 5000 lbs UPC #662536277235Special Price $1,038.45 was $1,166.80
-
100963 Hytec Double-Acting Swing/Pull Clamp - Manifold Mount - Upper Flange Style UPC #662536302623Special Price $1,018.88 was $1,144.81
-
100899 Hytec Swing/Pull Clamps - Threaded Body Style - 5000 lbs UPC #662536277211Special Price $1,037.47 was $1,165.70