100844 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141116
Part #100844 Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
| Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
| 100844 | 7,500 | 0.250 | Air | Conventional |
| * Based on 5,000 psi maximum operating pressure | ||||
| Order No. |
Dimensions (In Inches) | |||||
| A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
| 100844 | 3.435 | 4.185 | 3.500 | 3.875 | 0.830 | 1/16 NPTF |
| Order No. |
Dimensions (In Inches) | ||||
| E | G Dia. |
L | R Port |
S Flats |
|
| 100844 | 3.250 | 0.500 | 1.500 | 1/4 NPTF | 0.875 |
| Order No. |
Dimensions (In Inches) | |||||||
| F | H | J | K | M | N | Q | ||
| Size | Depth | |||||||
| 100844 | 0.875 | 0.438 | 0.875 | 0.625 | 1/2-13 UNC | 0.625 | 1.750 | 0.406 |
| AIR ADVANCE WORK SUPPORT | ||
| Order No. |
Approximate Plunger Extension Force |
|
| Air Pressure * (psi) |
Force (lbs.) |
|
| 100844 | 30 | 8.0 |
| NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. | ||
| Manufacturer | SPX Hytec |
|---|
-
110061 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 5000 PSI UPC #662536375221Special Price $254.49 was $285.14 -
110091 Hytec Swing Clamp 5000 lbs S/A S Manifold Mount Lower Flange UPC #662536373784Special Price $858.58 was $961.99 -
110092 Hytec Swing Clamp 5000 lbs D/A LH Manifold Mount Lower Flange UPC #662536373845Special Price $1,328.24 was $1,492.40 -
110090 Hytec Swing Clamp 5000 lbs S/A RH Manifold Mount Lower Flange UPC #662536373791Special Price $964.97 was $1,081.20 -
110089 Hytec Swing Clamp 5000 lbs S/A LH Manifold Mount Lower Flange UPC #662536373814Special Price $964.97 was $1,081.20 -
110065 Hytec UniForce Hydraulic Clamp, 3500 LB. Force 5000 PSI UPC #662536375269Special Price $409.64 was $458.98 -
110062 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 2500 PSI UPC #662536375238Special Price $254.49 was $285.14