52K8DGB Peter Paul 2-Way Normally Closed Solenoid Valve 3/32" Orifice, 1/8" NPT Ports

2-Way Normally Closed Valve

Our original mini — engineered for space economy without sacrificing performance. Typical applications include medical, analytical instrumentation. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

• Smaller than the Series 30 but larger than the Series 58 and 15 valves.
• Tough with options to use in hazardous location environments or low watt applications.
• High quality engineering.

OPERATING CONDITIONS

Media:Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range:Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure:5000 PSI
Leakage:Bubble tight for standard valves.
Vacuum:To 5 Microns*

ELECTRICAL CHARACTERISTICS

Coil Voltage:6.0 to 575V AC 60 HZ. and 5.4 to 515V AC 50 HZ. — 3.0 to 300V DC
Nominal Power:AC — 6.0 Watts DC — 7.0 Watts
Coil Construction:Non-molded Class A, Molded and potted Class F. (Class H optional)
Typical Response Time on Air:4 – 16 Milliseconds
Operating Speed:Up to 600 CPM
Duty Cycle:Continuous

MECHANICAL CHARACTERISTICS

Body:Stainless Steel (Std.), Brass (Opt.) or Aluminum (Opt.)
Internal Components:Stainless Steel
Elastomers:Nitrile (Buna) (Std.). Many other elastomers available.*
Orifice Diameter:See table above.
Porting:See table above.
Housing:Grommet and 1/2″ NPT conduit – many options available.*
Listings:Most valves are UL and CSA listed.*
Life Expectancy:Millions of cycles, depending on application, lubrication, etc.
Valve Weight:Grommet Valve: 0.38 lb Conduit Valve: 0.44 lb
Repair Packs:See table above.
Options:Alternate Port Locations, Metering, Alternate Elastomers, Low Wattage, Spade Terminal Coil and Explosion Proof

* Consult representative or factory for options and specifications.

***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***