70315SN2KVVRN0H322C2 Parker Skinner 3 Way Normally Closed 1/4" NPT Manual Reset Stainless Steel Solenoid Valve 24VDC Conduit

70315SN2KVVRN0H322C2 Parker Skinner 3 Way Normally Closed 1/4" NPT Manual Reset Stainless Steel Solenoid Valve 24VDC Conduit

3 Way Manual Reset solenoid valves are designed to start and stop the flow of media as the result of an electrical signal. This can be a problem in some power outage situations were the valve must remain in the no voltage supplied position until the system is manually restarted. Manual reset valves have an added safety device to address this issue. When the manual reset device is triggered, the valve remains in the at rest position until the reset mechanism is manually latched.

Pilot operated versions require minimum operating pressure differential for proper operation.

Installation

Valves can be mounted in any position.

Mechanical Characteristics

• Standard Materials of Construction
• Body—brass or stainless steel (430)
• Seals—NBR or FKM seals as listed
• Sleeve tube—stainless steel (303 or 304)
• Plunger—stainless steel (430FR)
• Shading ring—copper
• Stop—stainless steel (430FR)
• Springs—stainless steel (18-8)
• Pilot orifice—stainless steel (303)

Compatible Fluids

• Depending on the valve used, most common media including air, inert gases or petroleum products.
• Hydraulic Fluids

Power Consumption

10, 22 watts

Agency Approvals

cUL listed.

Applications:

• Pilot control on process valves
• Fluid “circuit breakers” requiring manual intervention to reset after being tripped (safety feature).

***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***