Excellent Quality, Service & Pricing | Trusted Since 1996

  • +1 (818) 700-8838
Everyday Low Prices

9628 SPX Power Team Post-Tensioning Single-Strand Valve UPC #662536128025

9628 SPX Power Team Post-Tensioning Single-Strand Valve UPC #662536128025

Be the first to review this product

In Stock


Regular Price: $1,213.00

Price $1,031.05

Quick Overview

Part #9628 SPX Power Team Post-Tensioning Single-Strand Valve
OR
 

SPX Power Team Post-Tensioning Single-Strand

4-WAY/3-POSITION (TANDEM CENTER) MANUAL VALVE

Application – Single strand, double-acting stressing jacks with Power Wedge seater.

Actuation – Lever operated, detent positioned.


Operation
With valve in center position, pump is started.
Cable is inserted into stressing tool, valve is placed in “A” position. “Pull” portion of stressing tool is pressurized to specified level for proper cable tensioning (“A” port is checked internally, can only be released by building pressure in “B” position).
    Valve is placed in “B” position, which is pressure controlled and will not exceed 6,400 psi. “Return” portion of stressing tool is pressurized and will release “A” port when pressure reaches approximately one-half the “A” port pressure. “A” port remains open as long as this pressure differential is maintained.
    Pump is stopped, valve is placed in “A” position, releasing “B” port pressure.
Used on these pumps: PA17*, PA46*, PA55, PE17*, PE21*, PE30, PE46*, PE55, PE60, PE84, PE120, PE200, PE400, PG30*, PG55, PG120, PG400, PQ60 and PQ120 series.

* These pumps may have reduced first flow stage characteristics due to internal valve restrictions.

CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.
IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.
IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required.
For valves 9504, 9584, 9610 and 9610A, order four 12001 cap screws.
For valve 9582, order two 12001 and two 10856 cap screws.

Order No.Cylinder
Application *
OperationValve TypeVoltAdvance /
Return
Advance/Hold ReturnPosi-Check FeatureWeight (lbs.)
9628 S.A. & D.A. Manual Post Tensioning Special No No 5.4

 

* “S.A.” represents single-acting cylinders, “D.A.” represents double-acting cylinder

 

 

***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***



Product Availability In Stock

Write Your Own Review

You're reviewing: 9628 SPX Power Team Post-Tensioning Single-Strand Valve UPC #662536128025

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value
Price

Back to Top