100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005746
Part #100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity, 5,000 maximum PSI Required, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$800.64
was
$899.60
SKU
100226
100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005746 is available to buy in increments of 1
Part #100226Hytec Spring Advance Work Supports- 7,500 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 7,500 lb. work supports are available in four different spring advanced models with either conventional or manifold mounting. All use plunger seals to protect against contamination. The spring advance models use Hytec’s diaphragm breather system.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Spring advance models
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order NO. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100226 | 7,500 | 0.25 | Spring | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||
A Retract Operating Range |
B Advance Operating Range |
C | D | |
100226 | 3.435 | 4.185 | 3.500 | 3.250 |
Order No. |
Dimensions (In Inches) | ||||
E |
G Dia. |
x |
L |
||
Thread Size |
Dia | ||||
100226 | 3.875 | 1.000 | 1/4 NPTF | - | 1.500 |
Order No. |
Dimensions (In Inches) | |||||||
F |
H | J | K | M Thread | N |
T Dia |
||
Size | Depth | |||||||
100226 | 1.625 | 2.000 | 0.875 | 1.250 | 1/2-13 UNC | 0.875 | 1.750 | 1.500 |
Order No. |
Dimensions (In Inches) | |
O Mounting
|
P Mounting
|
|
100226 | - | - |
Order No. |
Dimensions (In Inches) | ||
X |
Y
|
||
Thread Size |
Dia | ||
100226 | 1/4 NPTF | - | - |
Order No. |
SPRING ADVANCE WORK SUPPORT | ||
Approximate Forces Required To Depress Plunger (lbs.) |
|||
Fully
|
Extended |
Fully Depressed |
|
100226 | 5.0 | 7.0 | 9.0 |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
64767 SPX Hytec Pump Body UPC #662536279161Special Price $195.27 was $219.40
-
300654 SPX Hytec Repair Kit, Hydraulic Work SupportSpecial Price $129.76 was $145.80
-
252030 SPX Hytec Air Lubricator UPC #662536103527Special Price $399.61 was $449.00
-
46823 Hytec Piston Rod UPC #662536238937Special Price $306.87 was $344.80
-
300481 Hytec Repair Kit for Center Hole Cylinder - UPC #662536082525Special Price $88.64 was $99.60