500036 SPX Hytec Mounting Base, 1,300LB Work Support , Air UPC #662536243223

SPX Hytec Mounting Base, 1,300LB Work Support , Air

Hytec’s air advance work supports have a spring return plunger which uses air pressure to extend it to contact the workpiece. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.Air advance work supports allow the plunger to be retracted out of the way during workpiece load/unload operations. Applying air pressure to the work support gently raises the plunger until it contacts the workpiece. Adjusting the air pressure will vary the plunger contact force. The air pressure within the work support also serves to keep contaminants out.The No. 100876’s threaded body may be compactly manifold mounted in your fixture or choose the No. 100877 which includes the 100876 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to .00007" per 100 lbs. of load. For base only, order number 500036.

Features:

• 1,300 lbs. capacity @ 5,000 psi maximum
• Fully corrosion resistant construction
• Manifold mount or conventional base mounting
• 1,000 psi minimum recommended pressure

***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***