110087 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536364959
Part #110087 Hytec Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
110087 | 7,500 | 0.250 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
110087 | 3.435 | 4.185 | 3.500 | 3.875 | 0.830 | 1/16 NPTF |
Order No. |
Dimensions (In Inches) | ||||
E | G Dia. |
L | R Port |
S Flats |
|
110087 | 3.250 | 0.500 | 1.500 | 7/16-20 UNF SAE-4 |
0.875 |
Order No. |
Dimensions (In Inches) | |||||||
F | H | J | K | M | N | Q | ||
Size | Depth | |||||||
110087 | 0.875 | 0.438 | 0.875 | 0.625 | 1/2-13 UNC | 0.625 | 1.750 | 0.406 |
AIR ADVANCE WORK SUPPORT | ||
Order No. |
Approximate Plunger Extension Force |
|
Air Pressure * (psi) |
Force (lbs.) |
|
110087 | 70 | 33.0 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. |
Manufacturer | SPX Hytec |
---|
-
110108 Hytec Retract Clamps, SAE Port, Force 3,780LB. UPC #662536377850Special Price $1,877.28 was $2,109.30
-
110173 Hytec Swing Clamps 1,200 lbs S/A LH Threaded Body UPC #662536491075Special Price $854.28 was $957.18
-
110109 Hytec Retract Clamps, SAE Port, Force 8,295LB. UPC #662536377843Special Price $2,347.82 was $2,638.00
-
110175 Hytec Swing Clamps 1,200 lbs S/A S Threaded Body UPC #662536491099Special Price $533.57 was $597.84
-
110106 Hytec Swing Clamps, Block, Left, Force 8,295LB. UPC #662536378024Special Price $2,611.53 was $2,934.30
-
110174 Hytec Swing Clamps 1,200 lbs S/A RH Threaded Body UPC #662536491082Special Price $662.24 was $742.00
-
110105 Hytec Swing Clamps, Block, Right, Force 8,295LB UPC #662536378017Special Price $2,553.59 was $2,869.20