We stock common AC and DC coils and several connection styles for quick swaps on the Gold Ring Parker Skinner Solenoid Valve series:
- Voltages: 120/60, 110/50, 24 VAC; 12 VDC, 24 VDC (others available upon request)
- Connections: DIN 43650, lead wires, conduit housings. Class F/H coils available.

Match body and seals to your fluid: brass or stainless bodies with NBR (oils/air), EPDM (water, some steam), FKM (fuels/solvents), or PTFE seats for aggressive media. For low ΔP, consider direct-lift for your Parker Skinner Valves; for clean liquids/gases, pilot-operated works well. We’ve seen these valves log 10 million cycles without performance issues.

In-stock Skinner valves usually ship within 24-48 hours. Non-stock or alternate coils/materials often run a little longer, and very special orders can take several weeks. Part numbers, voltage, and body/seal combos drive timing. We can suggest equivalents, partials, or factor expedites. Just contact us and we’ll map the fastest path.

Yes. Most Parker Skinner Valves support rebuild kits and simple coil swaps.
- Kits may include armature/plunger sets, springs, seals, and seats.
- Direct-lift and pilot-operated kits differ: check your series code.
We carry common kits and coils; instructions are usually straightforward, but we’re happy to walk you through the steps.

Hazardous-location operators are labeled by class/division/group (e.g. Class I, Div 1 gases). NEMA 7/9 covers explosion-proof enclosures; NEMA 4X is for corrosion/washdown – not explosion containment. We supply compliant operators (NEC/CSA). Confirm gas/dust group and site requirements with your safety team before ordering Parker Skinner Valves.