100141 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005296
Part #100141 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity, 5,000 maximum PSI Required, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$802.69
was
$901.90
SKU
100141
100141 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005296 is available to buy in increments of 1
Part #100141 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 7,500 lb. work supports are available in four different spring advanced models with either conventional or manifold mounting. All use plunger seals to protect against contamination. The spring advance models use Hytec’s diaphragm breather system.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Spring advance models
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order NO. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100141 | 7,500 | 0.25 | Spring | Manifold |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | ||
A Retract Operating Range |
B Advance Operating Range |
D | |
100141 | 3.435 | 4.185 | 4.250 |
Order No. |
Dimensions (In Inches) | ||
C | E |
G Dia. |
|
100141 | 3.500 | 3.875 | 1.000 |
Order No. |
Dimensions (In Inches) | ||||||
F | H | J | K | M | N | ||
Size |
Depth | ||||||
100141 | 1.625 | 2.000 | 0.875 | 1.250 | 1/2-13 UNC | 0.875 | 1.750 |
Order No. |
Dimensions (In Inches) | |
O Mounting |
P Mounting |
|
100141 | 1.250 | 2.878 |
Order No. |
Dimensions (In Inches) | ||
X |
Y
|
||
Thread Size |
Dia | ||
100141 | - | - | - |
Order No. |
SPRING ADVANCE WORK SUPPORT | ||
Approximate Forces Required To Depress Plunger (lbs.) |
|||
Fully
|
Extended |
Fully Depressed |
|
100141 | 5.0 | 7.0 | 9.0 |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
100200 Hytec Air to Oil Pump 40-125 PSI UPC#662536005562Special Price $2,968.33 was $3,335.20
-
100904 Hytec Swing Clamps Single-Acting Left Hand (Counter Clockwise) Cartridge Style 5000 lbs UPC #662536277327Special Price $952.67 was $1,067.42
-
100906 Hytec Swing Clamps Single-Acting Straight Pull Cartridge Style 5000 lbs UPC #662536277358Special Price $1,215.30 was $1,365.50
-
110123 Hytec Fluid Advance Work Supports 4,000 lbs. Capacity UPC #662536372558Special Price $1,001.87 was $1,122.54
-
100922 Hytec Air to Oil Pump 40-110 PSI UPC#662536330190Special Price $2,969.31 was $3,336.30
-
110122 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC #662536372008Special Price $623.45 was $698.54
-
100905 Hytec Swing Clamps Single-Acting Right Hand (Clockwise) Cartridge Style 5000 lbs UPC #662536277341Special Price $1,215.30 was $1,365.50