IDEAL FOR USE WITH SMALL HYDRAULICALLY POWERED TOOLS.
Vanguard Jr.® pumps provide two-speed high performance in a light-weight, compact package.
Gauge port provided on pump. Metal reservoir on all models.
Equipped with a 1⁄2 hp, 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage.
Low amperage draw permits use with smaller generators and low amperage circuits.
All pumps have a 10 foot remote control (PE183C has 25 foot remote control).
CSA rated for intermittent duty. Noise level of 85-90 dBA.
For operating hydraulic crimping, cutting or other tools:
No. PE183C - For crimping or pressing applications. Has special electrical circuitry to pulse/advance, hold at full pressure, build to a predetermined pressure, release and reset circuit. Features separate emergency return switch.
No. PE184C - Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select port connection with manual 4-way valve, start pump with remote control hand switch and extend connected tool. When hand switch is switched to off, pump stops and automatic valve opens, allowing tool to return. In center (neutral) position, manual control valve holds tool in position at time valve is shifted.
Specification :
Order No.
For use with Cyl. Type
Description
Valve Type
Valve Function
Control Switch ††
Motor
Reservoir Usable (cu .in.)
PE184C*
Single-Acting/ Double-Acting
Special crimping pump.
4-Way
Advance Return
Remote Control (10 ft.) on/off
1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase
104
* Also for use with special single-acting cylinder applications. ** Available with 220 Volt, 60/50 Hz motor (to order, place suffix “50-220” behind pump order number). Specify voltage when ordering.
Dimensions :
Order No.
Max Pressure Output (psi)
rpm
dBa at Idle and 10,000 (psi)
Amp Draw 115 V 10,000 (psi)
Oil Del. (cu. in./min.@)†
A (in.)
B (in.)
C (in.)
D (in.)
F (in.)
G (in.)
Weight with Oil (lbs.)
0 (psi)
100 (psi)
5,000 (psi)
10,000 (psi)
PE184C ††
10,000
12,000
85/90**
10.2 Amps
230
190
25
18
16
4 3/4
8
7 1/8
6
5 1/8
30
†† Special application pumps for cutting, crimping or pressing.
***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***
Intermittent stocking item, call for specific ship date. Please note, we go into production on some items the second you place your order. It is highly recommended that you place your order as soon as possible.