100874 Hytec Work Supports Spring Advance1,300 lbs. Capacity UPC #662536236584.jpg

100874 Hytec Work Supports Spring Advance 1,300 lbs. Capacity UPC #662536236584

100884 Hytec Work Supports Spring Advance 4,000 lbs. Capacity UPC #662536254236 Manifold Mount Detail.jpg

100884 Hytec Work Supports Spring Advance 4,000 lbs. Capacity UPC #662536254236

100875 Hytec Work Supports Spring Advance 1,300 lbs. Capacity UPC #662536238090

Part #100875 Hytec Work Supports Spring Advance 1,300 lbs. capacity at 5,000 psi maximum, Manifold mount or conventional base mounting, Filtered breather/rest button.
Special Price $622.73 was $699.70
SKU
100875
100875 Hytec Work Supports Spring Advance 1,300 lbs. Capacity UPC #662536238090 is available to buy in increments of 1

Part #100875 Hytec Work Supports Spring Advance 1,300 lbs. Capacity

 

Hytec’s spring advance work supports have a spring loaded plunger which contacts the workpiece as it is loaded into the fixture. The spring keeps the plunger in contact with the workpiece, allowing for variations between workpieces. To support any externally supplied loads, the sleeve surrounding the poppet grips the plunger and holds it in place.

The 100874 and 110124’s threaded body may be compactly manifold mounted in your fixture or choose the 100875 or metric version 110134 which includes the 100874 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.

Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035 for conventional mounting, and 421727 for manifold mounting.


Features:

  • 1,300 lbs. capacity @ 5,000 psi maximum
  • Fully corrosion resistant construction
  • Manifold mount or conventional base mounting
  • Filtered breather/rest button
  • 1,000 psi minimum recommended pressure

 

Order NO. Cap. *
(lbs.)
Oil Cap.
(cu. in.)
Advance
System
Mounting
Configuration
100875 1,300 0.01 Spring Base Conventional
* Based on 5,000 psi maximum operating pressure

 

 

 

Order
No.
Dimensions (In Inches)
M N P Q
Pressure Port
Thread Size
R
Port
Angle
††
S
Dia.
Operating Range
W
Retracted
X
Advanced
100875 1.000 0.700 0.385 7/16 - 20 UNF SAE-4 1.688 3.162 3.474
NOTE: †† 1.768 dia. min. clearance required.

 

 

Order
No.
Dimensions (In Inches)

T

U
V
Dia.
100875 1.750 2.562 0.281

 

 

Order
No.
MANIFOLD MOUNT DETAIL
AA
Thread
Size
BB
Min.
Thread
CC DD
Dia.
EE
Drill Point
Dia. Max.
FF
Dia.
GG
Max.
100875 - - - - - - -

 

Order
No.
MANIFOLD MOUNT DETAIL
HH JJ KK
Thread
Size
LL MM NN
Pressure Port
Dia. Max.
100875 1.968 1.188 1/4 - 20 UNC 1.456 0.594 -

NOTE:
Finish area to be 0.438 dia. min. centered on 0.126 dia. port hole.
See operating instructions for additional details.

 

AIR ADVANCE WORK SUPPORT

Order
No.
Approximate Forces Required
To Depress Plunger (lbs.)
* Air Pressure (psi) Force (lbs.)
100875 2.3 2.9
More Information
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:100875 Hytec Work Supports Spring Advance 1,300 lbs. Capacity UPC #662536238090
More from SPX Hytec