100847 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141154
Part #100847 Hytec Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100847 | 7,500 | 0.250 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
100847 | 4.435 | 5.615 | 4.227 | 3.875 | 0.830 | 1/16 NPTF |
Order No. |
Dimensions (In Inches) | ||||
E | G Dia. |
L | R Port |
S Flats |
|
100847 | 3.250 | 0.500 | 2.000 | 1/4 NPTF | 0.875 |
Order No. |
Dimensions (In Inches) | |||||||
F | H | J | K | M | N | Q | ||
Size | Depth | |||||||
100847 | 0.875 | 0.438 | 0.875 | 0.625 | 1/2-13 UNC | 0.625 | 1.750 | 0.406 |
AIR ADVANCE WORK SUPPORT | ||
Order No. |
Approximate Plunger Extension Force |
|
Air Pressure * (psi) |
Force (lbs.) |
|
100847 | 30 | 8.0 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. |
Manufacturer | SPX Hytec |
---|
-
110003 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536348805Special Price $920.98 was $1,031.91
-
110126 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536385909Special Price $456.73 was $511.75
-
110129 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536386111Special Price $865.79 was $972.80
-
110176 Hytec Swing Clamps 1,200 lbs D/A LH Threaded Body UPC #662536491105Special Price $828.74 was $928.56
-
110178 Hytec Swing Clamps 1,200 lbs D/A S Threaded Body UPC #662536491129Special Price $496.68 was $556.50
-
110177 Hytec Swing Clamps 1,200 lbs D/A RH Threaded Body UPC #662536491112Special Price $629.12 was $704.90
-
110006 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536348836Special Price $472.08 was $528.94