A logical choice at work sites where electricity or compressed air are unavailable. For single- or double-acting cylinders at operating pressures to 10,000 psi.
All gasoline engine/hydraulic pumps feature Posi-Check® valve to guard against pressure loss when valve is shifted from “advance” to “hold”.
PG303 and PG304
Powered by a 2-cycle, 2 hp Tecumseh engine giving it the lowest weight to horsepower ratio of all gasoline driven pumps.
Has an aluminum reservoir with 375 cu. in. of usable oil.
Has same basic pump as PE30 series electric operated pumps.
PG30 series pumps are equipped with roll cages to protect pump from damage.
PG30 series pumps weigh in at only 32 lbs. with oil.
PG303 is for single-acting cylinders, has a 9520 valve with separate internal return line; allows oil from running pump to return to reservoir, independently of cylinder return oil, when valve is in “return” position.
PG304 is for double-acting cylinders, has a 9506 4-way (tandem center) valve.
Order No.
For Use with Cyl. Type
Description
Valve Type
Valve No.
Valve Function
Reservoir Usable (cu. in.)
Horsepower
Cycle
PG303
Single-Acting
2 hp pump with 2 gal. reservoir and single-acting valve.
** Usable oil is calculated with oil fill at recommended level at 1/2" below cover plate
Order No.
Max Pressure Output (psi)
rpm
Oil Del. (cu. in./min. @)
A (in.)
B (in.)
C (in.)
D (in.)
E (in.)
F (in.)
Weight (lbs.)
100 (psi)
1,000 (psi)
5,000 (psi)
10,000 (psi)
PG303
10,000
6,000
275*
40
35
30
14 7/8
10 3/8
9 1/2
16
5 1/8
13 1/2
32.0
* First stage oil delivery from 0-400 psi @ 230 cu. in. per minute minimum.
***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***
