IDEAL FOR USE WITH SMALL HYDRAULICALLY POWERED TOOLS.
Vanguard Jr.® pumps provide two-speed high performance in a light-weight, compact package.
Gauge port provided on pump. Metal reservoir on all models.
Equipped with a 1⁄2 hp, 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage.
Low amperage draw permits use with smaller generators and low amperage circuits.
All pumps have a 10 foot remote control (PE183C has 25 foot remote control).
CSA rated for intermittent duty. Noise level of 85-90 dBA.
For operating hydraulic crimping, cutting or other tools:
No. PE183C - For crimping or pressing applications. Has special electrical circuitry to pulse/advance, hold at full pressure, build to a predetermined
pressure, release and reset circuit. Features separate emergency return switch.
No. PE184C - Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select port connection
with manual 4-way valve, start pump with remote control hand switch and extend connected tool. When hand switch is switched to off, pump stops and automatic valve
opens, allowing tool to return. In center (neutral) position, manual control valve holds tool in position at time valve is shifted.
Specification :
Order No.
For use with Cyl. Type
Description
Valve Type
Valve Function
Control Switch
††
Motor
Reservoir Usable (cu .in.)
PE184-2
Single-Acting/ Double-Acting
PE184, except with 2 gal. reservoir.
4-Way
Advance Hold Return†
Remote Motor Control (10 ft.) on/off
1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase
525††
** Available with 220 Volt, 60/50 Hz motor (to order, place suffix “50-220” behind pump order number). Specify voltage when ordering.
† Holds when motor is shut off and valve is in “advance” position. †† Pumps supplied with 2 gal. oil (usable oil is 355 cu. in.), will
hold 2½ gal. when filled to within 1½" below reservoir cover plate.
Dimensions :
Order No.
Max Pressure Output (psi)
rpm
dBa at Idle and 10,000 (psi)
Amp Draw 115 V 10,000 (psi)
Oil Del. (cu. in./min.@)†
A (in.)
B (in.)
C
(in.)
D (in.)
F
(in.)
G (in.)
Weight with Oil (lbs.)
0 (psi)
100
(psi)
5,000 (psi)
10,000 (psi)
PE184-2*
10,000
12,000
85/90**
10.2 Amps
230
190
25
18
18 1/2
7 1/4
11 1/2
10
9 1/2
8
42
* 2 1/2 gal. reservoir. ** Measured at 3 ft. distance, all sides.
***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***
