9576 SPX Power Team 3-Way, 3-Position Metering Tandem Center UPC #662536127691

SPX Power Team 3-way, 3-Position Metering:

3-WAY/3-POSITION (TANDEM CENTER) METERING VALVE

Application – Single-acting cylinders.

Actuation – Lever operated.

Functions – Cylinder piston metered “advance,” “hold” and metered “return.”

Used on these pumps – PA17, PA46, PA55, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PQ60, PQ120, PE200, PE400, PG30, PG55, PG120 and PG400 series.

10,000 PSI., 3/8" PORTS, 5 GPM MAX FLOW RATE.

NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached if desired.

Also, the 9576 can be remote mounted with a 9510 Subplate.

CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.

IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.

IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required.
For valves 9502 and 9520, order four 12001 cap screws.
For valve 9576, order four 17428 cap screws.

* “S.A.” represents single-acting cylinders

***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***