100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005746
Part #100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity, 5,000 maximum PSI Required, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$800.64
was
$899.60
SKU
100226
100226 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536005746 is available to buy in increments of 1
Part #100226Hytec Spring Advance Work Supports- 7,500 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 7,500 lb. work supports are available in four different spring advanced models with either conventional or manifold mounting. All use plunger seals to protect against contamination. The spring advance models use Hytec’s diaphragm breather system.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Spring advance models
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order NO. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100226 | 7,500 | 0.25 | Spring | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||
A Retract Operating Range |
B Advance Operating Range |
C | D | |
100226 | 3.435 | 4.185 | 3.500 | 3.250 |
Order No. |
Dimensions (In Inches) | ||||
E |
G Dia. |
x |
L |
||
Thread Size |
Dia | ||||
100226 | 3.875 | 1.000 | 1/4 NPTF | - | 1.500 |
Order No. |
Dimensions (In Inches) | |||||||
F |
H | J | K | M Thread | N |
T Dia |
||
Size | Depth | |||||||
100226 | 1.625 | 2.000 | 0.875 | 1.250 | 1/2-13 UNC | 0.875 | 1.750 | 1.500 |
Order No. |
Dimensions (In Inches) | |
O Mounting
|
P Mounting
|
|
100226 | - | - |
Order No. |
Dimensions (In Inches) | ||
X |
Y
|
||
Thread Size |
Dia | ||
100226 | 1/4 NPTF | - | - |
Order No. |
SPRING ADVANCE WORK SUPPORT | ||
Approximate Forces Required To Depress Plunger (lbs.) |
|||
Fully
|
Extended |
Fully Depressed |
|
100226 | 5.0 | 7.0 | 9.0 |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
110174 Hytec Swing Clamps 1,200 lbs S/A RH Threaded Body UPC #662536491082Special Price $662.24 was $742.00
-
110108 Hytec Retract Clamps, SAE Port, Force 3,780LB. UPC #662536377850Special Price $1,877.28 was $2,109.30
-
110106 Hytec Swing Clamps, Block, Left, Force 8,295LB. UPC #662536378024Special Price $2,611.53 was $2,934.30
-
110109 Hytec Retract Clamps, SAE Port, Force 8,295LB. UPC #662536377843Special Price $2,347.82 was $2,638.00
-
110175 Hytec Swing Clamps 1,200 lbs S/A S Threaded Body UPC #662536491099Special Price $533.57 was $597.84
-
110173 Hytec Swing Clamps 1,200 lbs S/A LH Threaded Body UPC #662536491075Special Price $854.28 was $957.18
-
110105 Hytec Swing Clamps, Block, Right, Force 8,295LB UPC #662536378017Special Price $2,553.59 was $2,869.20