SPX Power Team PE55: Electric Portable
HEAVY DUTY MULTIPLE-APPLICATIONS PUMP. HEAVY CONSTRUCTION AND CONCRETE STRESSING. LOW VOLTAGE STARTING POSSIBLE.
- 1 1/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25 amps at full load, starts at reduced voltage. CSA rated for intermittent duty.
- 10 foot remote motor control (except PE552S which has a 25 foot remote motor and valve control).
- True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure.
- Reservoirs available in sizes up to 10 gallons.
- Light weight and portable. Best weight-to-performance ratio of all Power Team pumps.
- “Assemble to Order” System: There are times when a custom pump is required. Power Team’s “Assemble to Order” system allows you to choose from a wide range of pre-engineered, off-the shelf components to build a customized pump to fit specific requirements. By selecting standard components you get a “customized” pump without “customized” prices. All pumps come fully assembled, add oil and ready for work.
| Order No.*** | For Use with Cyl. Type | Description | Valve Type | Valve No. | Valve Function | Control Switch†† | Motor | Reservoir
Usable
(cu. in.) |
|---|
| PE552S |
Single-Acting |
PE552, except also has solenoid operated remote valve. |
3-Way |
9579 |
Advance Hold Return** |
Remote Motor & Valve |
1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase |
525 |
* Pumps available with 230 volt, 60/50 Hz motors. Specify voltage when ordering.
** Holds with motor shut off.
***To order PE55 series pumps with CSA approval, add “–C” to the Order No.
† Valves have Posi-Check® feature.
†† All remotes are 10 ft. long except for PE552S which is 25 ft. long.
†††Valving allows alternate and independent operation of two different spring return tools. Valve holds pressure only while valve is in “A” or “B” port position with pump motor shut off.
∞ Not to be used for lifting applications.
| Order No. | Max Pressure Output
(psi) | rpm | dBa at Idle and 10,000 (psi) | Amp Draw 115 V - at 10,000
(psi) | Oil Del.
(cu. in./min. @) † | A
(in.) | B
(in.) | C
(in.) | D
(in.) | E
(in.) | F
(in.) | G
(in.) | H
(in.) | Weight
w/ Oil
(lbs.) |
|---|
0
(psi) | 700
(psi) | 5,000
(psi) | 10,000
(psi) |
|---|
PE55
Series |
10,000 |
12,000 |
90/89* |
25 |
704 |
440 |
74 |
56 |
18 1/4 |
11 1/2 |
9 1/2 |
7 |
10 |
8 |
14 |
– |
65 |
*Noise level reading (dBA) measured at a 3 ft. distance, all sides.
** Amp draw at 10,000 psi, 230 Volts 50/60 Hz is 15 Amps.
***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***
