110058 Hytec Swing Clamp 750LB S/A S Low Flange UPC #662536363303
Part #110058 Swing Clamp 750LB S/A S Low Flange., Straight pull capacity 950 lbs. at 5,000 psi maximum, Manifold mountable,Heat treated, chrome plated piston rod.
Special Price
$828.74
was
$928.56
SKU
110058
110058 Hytec Swing Clamp 750LB S/A S Low Flange UPC #662536363303 is available to buy in increments of 1
Part #110058 Hytec Swing Clamp 750LB D/A LH Low Flange
Features:
- Manifold design eliminates external plumbing and reduces fixture height
- “Live Roller” design provides industry’s most reliable swing/pull mechanism
- Piston/Cam combination provides solid path for clamping action
- Typical ball and groove mechanism has higher potential for clogging and for damage from mis-aligned work pieces
- Available in single and double acting versions
- Special rod wiper seal protects internal clamp components
- Unique drainage system channels contaminants away from clamp
- Corrosion resistant construction
- Heat treated, chrome plated piston rod
- Manifold mountable
- Unique “Live Roller” swing mechanism for increased service life
- Power-Tech® treated body and hardened cam for long wear and corrosion resistance
- Single-acting and double-acting models are dimensionally interchangeable
- Straight pull capacity 950 lbs. at 5,000 psi maximum
- Flange top or bottom mounting
| Order No. | Oper. | Swing Direction |
Force * (lbs.) |
Eff. Area (sq. in.) |
Oil Cap. (cu. in.) |
||
| Clamp | Unclamp | Clamp | Unclamp | ||||
| 110058 | Straight Pull | Straight Pull | 750 | 0.195 | - | 0.160 | - |
| * With 1.25" long arm at 5,000 psi maximum operating pressure. | |||||||
| Order No. | A Total Stroke |
B Clamping Stroke |
C | G ‡ Dia. |
H Dia. |
J | K | L | M |
N Thread |
P Thread |
| 110058 | 0.818 | 0.345 | 0.108 | 0.560 | 1.210 | 2.379 | 3.359 | 4.912 | 5.138 | 0.275 | 1/4-20 UNC |
| † Do not pressurize - single-acting only. ‡ For Custom Arm Mounting and Maximum Operating Speed, See Swing/Pull Clamp Accessories Internal cam may be removed for an unguided straight pull. ‡‡Surface finish to be 63. Finish of 125 acceptable with concentric tool marks only. Finish area to be 0.525 dia. min. centered on 0.309 dia. port hole. See Downloads - operating instructions for additional port details. |
|||||||||||
| Order No. | E Clamp Port |
F Unclamp Port |
Q |
R | S |
| 110058 | SAE O-Ring | Vent † | 1.375 | 1.995 | 2.250 |
| Order No. | D ‡‡ Port Dia. |
T | U | V | W | X |
Y Thread |
Z |
| 110058 | 0.309 Max. |
0.696 | 0.827 | 1.306 | 1.002 | 1.392 | 1/4-20 UNC | 0.306 |
| Product Availability | Intermittent stocking item, call for specific ship date. Please note, we go into production on some items as soon as we receive your order. It is highly recommended that you place your order as soon as possible. |
|---|---|
| Manufacturer | SPX Hytec |
Write Your Own Review
More from SPX Hytec
-
-
252030 SPX Hytec Air Lubricator UPC #662536103527Special Price $431.65 was $485.00 -
46823 Hytec Piston Rod UPC #662536238937Special Price $331.44 was $372.40
-
300481 Hytec Repair Kit for Center Hole Cylinder - UPC #662536082525Special Price $95.76 was $107.60
-
300654 SPX Hytec Repair Kit, Hydraulic Work SupportSpecial Price $140.18 was $157.50
-
64767 SPX Hytec Pump Body UPC #662536279161Special Price $210.93 was $237.00
-
300821 SPX Hytec Repair Kit for Swing ClampSpecial Price $147.12 was $165.30