RB15013S SPX Power Team Press, Electric, 150 Ton Roll-Bed, Double UPC #662536002714

• The original, patented Roll-Bed® design. Bed rolls out for easy loading and unloading with a crane or other lifting device.
• Movable workhead glides easily side-to-side for full off-center load capacity across width of upper frame.
• “Daylight” is 50 1/2" x 60" for 80 and 100-ton models; 51 1/4" x 64" on 150 and 200-ton presses.
• Fast approach of double-acting, 13 1/8" stroke cylinder is provided by PQ1204S “Quiet” electric/hydraulic pump with remote control hand switch. Operator can view work from all sides with fingertip control of cylinder piston travel.

• Adjustable lower bed width – For secure balancing and centering of heavy jobs. Loosen adjusting bolts to adjust bed from 4" to more than 27". See dimension “H.”
• Movable workhead – For off-center pressing jobs, workhead moves on bearings across upper bolster. Presses can be used at full capacity, regardless of where workhead is placed.
• Lifting mechanism – Simply turn crank handle to raise or lower upper bolster. Screw mechanism raises or lowers both sides evenly (a heavyduty 1/2" drill motor can replace handle for automatic adjustment). Four locking pins hold bolster in place for pressing.
• Optional heavy-duty straightening fixtures – Make straightening jobs easy and accurate to within .004"! Rollers are ball bearing mounted and handle raises or lowers for easy turning of the work.

* Solenoid valve with 24 volt remote control hand switch.
† Frame is shipped assembled.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 10,000 psi: PQ120-73/78; measured at 3 foot distance, all sides.
†† Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary with operating conditions.
3,000 lbs maximum load can be supported on bed when raised on the rollers.