110135 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536391825
Part #110135 Hytec Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
| Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
| 110135 | 7,500 | 0.250 | Air | Conventional |
| * Based on 5,000 psi maximum operating pressure | ||||
| Order No. |
Dimensions (In Inches) | |||||
| A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
| 110135 | 3.435 | 5.615 | 4.227 | 3.875 | 0.830 | **G 1/8-28 |
| NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
||||||
| Order No. |
Dimensions (In Inches) | ||||
| E | G Dia. |
L | R Port |
S Flats |
|
| 110135 | 3.250 | 0.500 | 2.000 | ***M12 x 1.6 6H | 0.875 |
| NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
|||||
| Order No. |
Dimensions (In Inches) | |||||||
| F | H | J | K | M | N | Q | ||
| Size | Depth | |||||||
| 110135 | 0.875 | 0.438 | 0.875 | 0.625 | ***M12 x 1.5 6H | 0.580 | 1.750 | 0.406 |
| NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
||||||||
| AIR ADVANCE WORK SUPPORT | ||
| Order No. |
Approximate Plunger Extension Force |
|
| Air Pressure * (psi) |
Force (lbs.) |
|
| 110135 | 100 | 49.0 |
| NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. | ||
| Manufacturer | SPX Hytec |
|---|
-
100155-230 Hytec Electric/Hydraulic Pumps 1 HP UPC #662536137652Special Price $4,323.45 was $4,844.20 -
100186 Hytec Electric/Hydraulic Pumps 1 HP UPC #662536005463Special Price $5,102.56 was $5,733.21 -
100937 Hytec Center Hole Cylinders UPC#662536281508Special Price $894.90 was $1,005.51 -
100939 Hytec Center Hole Cylinders UPC#662536281522Special Price $894.90 was $1,005.50 -
100940 Hytec Center Hole Cylinders UPC#662536281539Special Price $942.87 was $1,059.40 -
100938 Hytec Center Hole Cylinders UPC#662536281515Special Price $765.31 was $859.90 -
100155 Hytec Electric/Hydraulic Pumps 1 HP UPC #662536137652Special Price $4,323.45 was $4,844.20