110088 Hytec Work Support, Air, 7500 lbs. Capacity UPC #662536364966
Part #1110088 Hytec Work Support, Air, 7500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
| Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
| 110088 | 7,500 | 0.250 | Air | Conventional |
| * Based on 5,000 psi maximum operating pressure | ||||
| Order No. |
Dimensions (In Inches) | |||||
| A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
| 110088 | 4.435 | 5.615 | 4.227 | 3.875 | 0.830 | 1/16 NPTF |
| Order No. |
Dimensions (In Inches) | ||||
| E | G Dia. |
L | R Port |
S Flats |
|
| 110088 | 3.250 | 0.500 | 2.000 | 7/16-20 UNF SAE-4 |
0.875 |
| Order No. |
Dimensions (In Inches) | |||||||
| F | H | J | K | M | N | Q | ||
| Size | Depth | |||||||
| 110088 | 0.875 | 0.438 | 0.875 | 0.625 | 1/2-13 UNC | 0.625 | 1.750 | 0.406 |
| AIR ADVANCE WORK SUPPORT | ||
| Order No. |
Approximate Plunger Extension Force |
|
| Air Pressure * (psi) |
Force (lbs.) |
|
| 110088 | 70 | 33.0 |
| NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. | ||
| Manufacturer | SPX Hytec |
|---|
-
110130 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536386128Special Price $1,000.98 was $1,124.70 -
110011 Hytec Swing/Pull Clamp Manifold Mount Upper Flange Style 365 lbs UPC #662536348881Special Price $941.79 was $1,058.19 -
110009 Hytec Swing/Pull Clamp Manifold Mount Upper Flange Style 365 lbs UPC #662536348867Special Price $565.74 was $633.88 -
110129 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536386111Special Price $935.12 was $1,050.70 -
110007 Hytec Swing/Pull Clamp Manifold Mount Upper Flange Style 365 lbs UPC #662536348843Special Price $901.57 was $1,013.00 -
110131 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536386135Special Price $1,107.54 was $1,240.94 -
110010 Hytec Swing/Pull Clamp Manifold Mount Upper Flange Style 365 lbs UPC #662536348874Special Price $900.50 was $1,011.80