100885 Hytec Work Supports Spring Advance 4,000 lbs. Capacity UPC #662536254243
Part #100875 Hytec Work Supports Spring Advance 1,300 lbs. Capacity
Hytec’s spring advance work supports have a spring loaded plunger which contacts the workpiece as it is loaded into the fixture. The spring keeps the plunger in contact with the workpiece, allowing for variations between workpieces. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.
The 100884’s threaded body may be compactly manifold mounted in your fixture or choose the 100885 which includes the 100884 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction. Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminate inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00004" per 100 lbs. of load. For base only, order number 500028 for conventional mounting, and 421728 for manifold mounting.
Features:
- 4,000 lbs. capacity @ 5,000 psi maximum
- Fully corrosion resistant construction
- Manifold mount or conventional base mounting
- Small filtered breather/rest button to accommodate intricate workpieces
- 1,000 psi minimum recommended pressure
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100885 | 4,000 | 0.02 | Spring | Base Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
M | N | P | Q Pressure Port Thread Size |
R Port Angle |
†† S Dia. |
|
100885 | 0.945 | 0.735 | 0.420 | 7/16 - 20 UNF SAE-4 | 5° | 2.688 |
NOTE: †† 2.768 dia. min. clearance required. |
Order No. |
Dimensions (In Inches) | |
Operating Range | ||
W Retracted |
X Advanced |
|
100885 | 3.680 | 4.180 |
Order No. |
Dimensions (In Inches) | ||
T | U | V Dia. |
|
100885 | 2.750 | 3.562 | 0.281 |
Order No. |
Mounting Dimensions (In Inches) | ||||
AA Thread Size |
BB Min. Thread |
CC | DD Dia. |
EE Drill Point Dia. Max. |
|
100885 | - | - | - | - | - |
Order No. |
Mounting Dimensions (In Inches) | |||
FF Dia. |
GG Max. |
HH | JJ Max. |
|
100885 | - | - | - | - |
Order No. |
Mounting Dimensions (In Inches) | |||||
KK | LL | MM Thread Size |
NN | PP | RR Pressure Port Dia. Max. |
|
100885 | 2.843 | 2.063 | 1/4 - 20 UNC | - | - | - |
NOTE: Finish area to be 0.438 dia. min. centered on 0.126 dia. port hole. See operating instructions for additional details. |
Manufacturer | SPX Hytec |
---|
-
350917 Hytec Swing-Pull Clamp Accessories UPC #662536162845Special Price $66.70 was $74.73
-
350915 Hytec Swing-Pull Clamp Accessories UPC #662536162821Special Price $1,307.44 was $1,464.92
-
500187 Hytec Uniforce Clamp For 110065 OR 110066 UPC#662536375122Special Price $111.63 was $125.08
-
350916 Hytec Swing-Pull Clamp Accessories UPC #662536162838Special Price $64.05 was $71.76
-
500186 Hytec Uniforce Clamp For 110063 OR 110064 UPC#662536375115Special Price $183.16 was $205.80
-
500177 Hytec Mounting Bracket For Accumulators UPC #662536338622Special Price $175.06 was $196.70
-
500188 Hytec Uniforce Clamp For 110067 OR 110068 UPC#662536375139Special Price $405.57 was $455.70