100847 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141154
Part #100847 Hytec Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
| Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
| 100847 | 7,500 | 0.250 | Air | Conventional |
| * Based on 5,000 psi maximum operating pressure | ||||
| Order No. |
Dimensions (In Inches) | |||||
| A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
| 100847 | 4.435 | 5.615 | 4.227 | 3.875 | 0.830 | 1/16 NPTF |
| Order No. |
Dimensions (In Inches) | ||||
| E | G Dia. |
L | R Port |
S Flats |
|
| 100847 | 3.250 | 0.500 | 2.000 | 1/4 NPTF | 0.875 |
| Order No. |
Dimensions (In Inches) | |||||||
| F | H | J | K | M | N | Q | ||
| Size | Depth | |||||||
| 100847 | 0.875 | 0.438 | 0.875 | 0.625 | 1/2-13 UNC | 0.625 | 1.750 | 0.406 |
| AIR ADVANCE WORK SUPPORT | ||
| Order No. |
Approximate Plunger Extension Force |
|
| Air Pressure * (psi) |
Force (lbs.) |
|
| 100847 | 30 | 8.0 |
| NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. | ||
| Manufacturer | SPX Hytec |
|---|
-
300278 SPX Hytec Repair Kit for 100934 & 100935 CylinderSpecial Price $81.97 was $92.10 -
-
300624 SPX Hytec Repair Kit for In-line FilterSpecial Price $156.02 was $175.30 -
-
300279 SPX Hytec Repair Kit for 100936, 100937, 100938 and100939 CylindersSpecial Price $103.15 was $115.90
-
252033 SPX Hytec Air Regulator UPC #662536103558Special Price $246.00 was $276.40
-
200790 SPX Hytec Repair Kit for Retracting ClampSpecial Price $271.09 was $304.60