100229 Hytec Spring Advance Work Supports 2,100 lbs. Capacity UPC #662536005760
Part #100229 Hytec Spring Advance Work Supports 2,100 lbs. Capacity, Spring advance models, 2,100 lb. rated capacity at 5,000 psi maximum, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$459.78
was
$515.16
SKU
100229
100229 Hytec Spring Advance Work Supports 2,100 lbs. Capacity UPC #662536005760 is available to buy in increments of 1
Part #100229 Hytec Spring Advance Work Supports 2,100 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 2,100 lb. work supports are available in three different spring advanced models with either conventional or manifold mounting. All use plunger seals to protect against contamination. The spring advance models use Hytec’s diaphragm breather system.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Spring advance models
- 2,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
| Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
| 100229 | 2,100 | 0.100 | Spring | Conventional |
| * Based on 5,000 psi maximum operating pressure | ||||
| Order No. |
Dimensions (In Inches) | ||
| A Retract Operating Range |
B Advance Operating Range |
D | |
| 100229 | 2.375 | 2.750 | 4.062 |
| Order No. |
Dimensions (In Inches) | |||||
| C | E | G Dia. |
L | X | ||
| Thread Size |
Dia. | |||||
| 100229 | 2.250 | 1.750 | 0.500 | 1.375 | 1/4-20 UNC | - |
| Order No. |
Dimensions (In Inches) | ||||||
| F | H | J | K | M Thread |
T Dia. |
||
| Size | Depth | ||||||
| 100229 | 0.875 | 0.438 | 1.380 | 0.625 | 1/4-20 UNC | 0.312 | 0.281 |
| Order No. |
Dimensions (In Inches) | |
| N Mounting |
P Mounting |
|
| 100229 | - | - |
| Order No. |
Dimensions (In Inches) | ||
| X | Y | ||
| Thread Size |
Dia. | ||
| 100229 | 1/4-20 UNC | - | - |
| SPRING ADVANCE WORK SUPPORT | |||
| Order No. |
Approximate Forces Required To Depress Plunger (lbs.) |
||
| Fully Extended |
Extended 50% |
Fully Depressed |
|
| 100229 | 1.0 | 2.0 | 3.0 |
| Manufacturer | SPX Hytec |
|---|
Write Your Own Review
More from SPX Hytec
-
110112 Hytec Swing Clamp Surface Mount Externally Plumbed 750LB S/A S Lower Flange Style. UPC #662536377416Special Price $815.50 was $913.72 -
110147 Hytec Swing Clamp 365LB D/A LH Lower Flange. UPC #662536401296Special Price $771.03 was $863.90 -
110119 Hytec Swing Clamp Surface Mount Externally Plumbed 2,400LB D/A LH Lower Flange Style UPC #662536376730Special Price $931.74 was $1,046.90 -
110118 Hytec Swing Clamp Surface Mount Externally Plumbed 2,400LB S/A S Lower Flange Style UPC #662536376686Special Price $764.41 was $856.48 -
110144 Hytec Swing Clamp 365LB S/A LH Lower Flange. UPC #662536401234Special Price $771.98 was $864.96 -
110113 Hytec Swing Clamp Surface Mount Externally Plumbed 750LB D/A LH Lower Flange Style. UPC #662536377461Special Price $712.38 was $798.18 -
110114 Hytec Swing Clamp Surface Mount Externally Plumbed 750LB D/A RH Lower Flange Style. UPC #662536377454Special Price $868.02 was $975.30