100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623
Part #100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity, Rated capacity at 5,000 psi maximum, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$963.10
was
$1,079.10
SKU
100207
100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623 is available to buy in increments of 1
Part #100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity
Hytec's 1,100 lb. capacity work supports use a boot attached between the body and plunger to effectively seal out contaminants. A diaphragm breather system further protects internal components, and the block style design requires only a flat surface for mounting rather than the large threaded hole needed with threaded body designs. Two mounting styles are available for plumbing convenience: manifold and conventional mount.
These work supports use a spring-loaded plunger to minimize deflection and vibration: As the workpiece is loaded into the fixture, it contacts the plunger, and its weight or the design of the fixture holds the plunger depressed. When the work support is hydraulically pressurized, the plunger is locked into position.
Features:
- Spring advance
- 1,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100207 | 1,100 | 0.07 | Spring | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||
A Retract Operating Range |
B Advance Operating Range |
D |
N Hex. |
|
100207 | 2.375 | 2.670 | 2.500 | 1.500 |
Order No. |
Dimensions (In Inches) | |||||
C | E | G | L | X | ||
Thread Size |
Dia. | |||||
100207 | 2.250 | 1.750 | 0.375 | 1.375 | 1/8 NPTF | - |
Order No. |
Dimensions (In Inches) | ||||||
F | H | J | K |
M Thread
|
T Dia. |
||
Size | Depth | ||||||
100207 | 0.875 | 0.438 | 0.730 | 0.625 | 10-24 UNC | 0.250 | 0.281 |
Order No. |
SPRING ADVANCE WORK SUPPORT | ||
Approximate Forces Required To Depress Plunger (lbs.) |
|||
Fully Extended |
Extended 50% |
Fully Depressed |
|
100207 | 1.0 | 1.4 | 1.8 |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
100965 Hytec Double-Acting Swing/Pull Clamp - Manifold Mount - Upper Flange Style UPC #662536302722Special Price $742.65 was $832.10
-
100963 Hytec Double-Acting Swing/Pull Clamp - Manifold Mount - Upper Flange Style UPC #662536302623Special Price $1,018.88 was $1,144.81
-
100903 Hytec Swing/Pull Clamps - Threaded Body Style - 5000 lbs UPC #662536277297Special Price $1,121.40 was $1,260.00
-
100896 Hytec Single-Acting Swing/Pull Clamp - Manifold Mount - Upper Flange Style UPC #662536273923Special Price $902.02 was $1,013.50
-
100901 Hytec Swing/Pull Clamps - Threaded Body Style - 5000 lbs UPC #662536277235Special Price $1,038.45 was $1,166.80
-
100964 Hytec Double-Acting Swing/Pull Clamp - Manifold Mount - Upper Flange Style UPC #662536302715Special Price $1,018.87 was $1,144.80
-
100899 Hytec Swing/Pull Clamps - Threaded Body Style - 5000 lbs UPC #662536277211Special Price $1,037.47 was $1,165.70