350914 Hytec Swing-Pull Clamp Accessories UPC #662536162814
Part #350914 Swing-Pull Clamp Accessories UPC#662536162814
Features:
Swing/Pull Clamp Arms
Hytec offers both short and long arms for each series of “Live-RollerTM” swing/pull clamps. In each case, the short arm (often referred to as the “standard” arm) is designed to be used at pressures up to the clamp's maximum rating of 5000 psi. The long arms are designed to be used as is or easily modified for your applications that require a longer reach. When using the long arms, maximum hydraulic pressure and flow must be reduced. See the accompanying charts. Do not use meter-out circuitry for controlling doubleacting clamp speeds. See pages 105 and 123 for metering valves. Contact Hytec if further design assistance is required.
Rotation Options
Hytec's 2,400 lbs. capacity, 0.500 inch clamping stroke Swing/Pull clamps can be converted to a 30, 45, or 60 degree swing by exchanging the internal cam. Order the appropriate cam from the table to the left.
All of Hytec's 2,400 lbs. capacity, 0.500 inch clamping stroke Swing/Pull clamps are also available from the factory with 30, 45, and 60 degree swing options. Contact Hytec for ordering information.
Custom Arm Mounting for Swing/Pull Clamps
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the Hytec arms or some derating of the clamp will be necessary. The design feature allowing the arm to be clamped to the piston rod is recommended for all applications of single and double arms. See the accompanying chart for design details. In applications where there is no bending stress being transferred into the piston rod (like push/pull linkages and equalizing double arms), this design detail may be eliminated. In these applications, the clamp's full capacity (referred to as “straight pull” capacity) is available.
IMPORTANT:
Any clamp using a modified or custom arm that is longer or heavier than Hytec's standard arms must be derated to prevent internal damage. Do not exceed the maximum speed and pressure ratings for Hytec's standard arms. For maximum hydraulic pressure and speed ratings, see the accompanying charts. Do not use meter-out circuitry for controlling double-acting clamp speeds. Contact Hytec if further design assistance is required.
Rotation Options
Order No. |
Rotation Angle (deg.) |
Rotation Direction |
Clamp Capacity (lbs.) |
Clamping Stroke |
350914 | 60 | Right Hand | 2,400 | 0.500 |
***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***
Product Availability | Intermittent stocking item, call for specific ship date. Please note, we go into production on some items as soon as we receive your order. It is highly recommended that you place your order as soon as possible. |
---|---|
Manufacturer | SPX Hytec |
-
100998 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536384858Special Price $826.54 was $928.70
-
100043B Hytec Cylindrical Body Double Acting cylinders UPC #662536137492Special Price $580.90 was $652.70
-
100920 Hytec Air to Oil Pump 40-110 PSI UPC #662536330176Special Price $1,630.93 was $1,832.50
-
100190 Hytec Air to Oil Pump 40-125 PSI UPC #662536005500Special Price $1,577.00 was $1,771.91
-
100988 Hytec Swing/Pull Clamps Double-Acting Cartridge Style 5000 lbs UPC #662536356923Special Price $1,215.30 was $1,365.50
-
100191 Hytec Air to Oil Pump 40-125 PSI UPC #662536224734Special Price $1,576.99 was $1,771.90
-
100174 Hytec Air to Oil Pump 40-125 PSI UPC #662536005388Special Price $1,576.99 was $1,771.90