110087 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536364959
Part #110087 Hytec Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
110087 | 7,500 | 0.250 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
110087 | 3.435 | 4.185 | 3.500 | 3.875 | 0.830 | 1/16 NPTF |
Order No. |
Dimensions (In Inches) | ||||
E | G Dia. |
L | R Port |
S Flats |
|
110087 | 3.250 | 0.500 | 1.500 | 7/16-20 UNF SAE-4 |
0.875 |
Order No. |
Dimensions (In Inches) | |||||||
F | H | J | K | M | N | Q | ||
Size | Depth | |||||||
110087 | 0.875 | 0.438 | 0.875 | 0.625 | 1/2-13 UNC | 0.625 | 1.750 | 0.406 |
AIR ADVANCE WORK SUPPORT | ||
Order No. |
Approximate Plunger Extension Force |
|
Air Pressure * (psi) |
Force (lbs.) |
|
110087 | 70 | 33.0 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. |
Manufacturer | SPX Hytec |
---|
-
110134 Hytec Work Supports, Spring, 1,300 lbs. Capacity UPC #662536391818Special Price $594.92 was $666.58
-
110124 Hytec Work Supports, Spring, 1,300 lbs. Capacity UPC #662536372015Special Price $459.67 was $515.03
-
110135 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536391825Special Price $980.51 was $1,101.70
-
110088 Hytec Work Support, Air, 7500 lbs. Capacity UPC #662536364966Special Price $941.26 was $1,057.60
-
100847 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141154Special Price $980.51 was $1,101.70
-
100269 Hytec Spring Advance Work Supports 2,100 lbs. Capacity UPC #662536005876Special Price $537.36 was $602.08
-
110136 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536391832Special Price $683.99 was $766.38