10-765-6603 CEJN Quick Disconnect Nipple, 1 5/16

10-765-6603 CEJN Quick Disconnect Nipple, 1 5/16"-12 ORB Female Thread Connection

10-065-1403-CEJN-Quick-Disconnect-Coupling,-1-Female-Thread-NPT-Connection

10-065-1403 CEJN Quick Disconnect Coupling, 1" Female Thread NPT Connection

10-064-6603 CEJN Quick Disconnect Nipple With Pressure Eliminator, Female Thread 1 5/16"-12 UN Connection

Part #10-064-6603 CEJN Quick Disconnect Nipple With Pressure Eliminator, Female Thread 1 5/16"-12 UN Connection
Special Price $203.20 was $227.67
SKU
10-064-6603
10-064-6603 CEJN Quick Disconnect Nipple With Pressure Eliminator, Female Thread 1 5/16"-12 UN Connection is available to buy in increments of 1
Series 064 DN25 Pressure Eliminator
  • Pressure eliminator for easy connection
  • Meets and exceeds ISO 16028
  • Flat-face design to minimize spillage
  • One-hand operated
  • Dust caps available
  • ISO 16028 Steel couplings, Series 065
 
CEJN Series 064 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 064 connects with couplings in Series 065.

The pressure eliminator nipples are also available in five smaller sizes; DN 6.3 (Series 264), DN 10 (Series 364), DN 12.5 (Series 564), DN 16 (Series 664) and DN19 (764).

Nipple with pressure eliminator

Part No. Connection Length Diameter Hexagon Seal
Female thread 10 064 6603 1 5/16"-12 UN (1" SAE) 146.4 50 46 NBR

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Technical data
Temperature range: -22°F — +212°F (-30°C — +100°C)
Material nipple: Hardened steel (zinc passivation)
Material seal: Nitrile (NBR/PUR)
Connectability: With static pressure up to 400 bar on the nipple side
Disconnection under pressure: Not allowed
Max. working pressure connected: 350 bar (5076 PSI)
Max. working pressure disconnected: 350 bar (5076 PSI)
Min. burst pressure connected: 1200 bar (17404 PSI)
Min. burst pressure disconnected: 1200 bar (17404 PSI)
Comment: Connects with couplings in CEJN 065 series and other brands DN25 - 1" couplings within the ISO 16028 standard
Interchangeable with: All brands dimensionally interchanging with ISO16028

Rated flow is measured at 1 bar pressure drop. Flow measured with coupling Series 065.

Pressure drop chart
Flow, l/min. (GPM UK)
Series 064 DN25 Pressure Eliminator
Flow, l/min. (GPM UK)
Flow measured with coupling Series 065



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

More Information
Product Availability Ships in 24-48 Hours, FOB: Point of Origin
Write Your Own Review
You're reviewing:10-064-6603 CEJN Quick Disconnect Nipple With Pressure Eliminator, Female Thread 1 5/16"-12 UN Connection
More from