PE172SM SPX Power Team Electronic Portable 2 Speed Pump 3-Way Valve Aluminum Reservoir Solenoid Operated Valve UPC #662536312882

PE172SM SPX Power Team Electronic Portable 2 Speed Pump 3-Way Valve Aluminum Reservoir Solenoid Operated Valve UPC #662536312882

PE183-SPX-Power-Team-Electric-Portable-Pump-Cubic-UPC-662536001656

PE183 SPX Power Team Electric Portable Pump, Cubic UPC #662536001656

PE182 SPX Power Team Electric Portable Pump, UPC #662536001649

Part #PE182 SPX Power Team Electric Portable Pump,
Special Price $4,131.38 was $4,642.00
SKU
PE182-662536001649
PE182 SPX Power Team Electric Portable Pump, UPC #662536001649 is available to buy in increments of 1

SPX Power Team PE18: Electric Portable

Features:

IDEAL FOR USE WITH SMALL HYDRAULICALLY POWERED TOOLS.
  • Vanguard Jr.® pumps provide two-speed high performance in a light-weight, compact package.
  • Gauge port provided on pump. Metal reservoir on all models.
  • Equipped with a 1⁄2 hp, 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage.
  • Low amperage draw permits use with smaller generators and low amperage circuits.
  • All pumps have a 10 foot remote control (PE183C has 25 foot remote control).
  • CSA rated for intermittent duty. Noise level of 85-90 dBA.
For operating hydraulic crimping, cutting or other tools:
  • No. PE183C - For crimping or pressing applications. Has special electrical circuitry to pulse/advance, hold at full pressure, build to a predetermined pressure, release and reset circuit. Features separate emergency return switch.
  • No. PE184C - Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select port connection with manual 4-way valve, start pump with remote control hand switch and extend connected tool. When hand switch is switched to off, pump stops and automatic valve opens, allowing tool to return. In center (neutral) position, manual control valve holds tool in position at time valve is shifted.

Specifications:

Order No.For use with Cyl. TypeDescriptionValve TypeValve FunctionControl Switch ††MotorReservoir
Usable
(cu .in.)
PE182 Single-Acting Base model pump has 1/2 hp pump with 2-Way valve and 1/2 gal. reservoir. 2-Way Advance Return† Remote Motor Control (10 ft.) on/off 1/2 hp, 110/115VAC**
50/60 Hz, A.C., Single Phase
104

* Also for use with special single-acting cylinder applications.
** Available with 220 Volt, 60/50 Hz motor (to order, place suffix “50-220” behind pump order number). Specify voltage when ordering.
† Holds when motor is shut off and valve is in “advance” position.
†† Pumps supplied with 2 gal. oil (usable oil is 355 cu. in.), will hold 2½ gal. when filled to within 1½" below reservoir cover plate.
∞ Not to be used for lifting.


Dimensions:

Order
No.
Max Pressure Output
(psi)
rpmdBa at Idle and 10,000
(psi)
Amp Draw 115 V 10,000
(psi)
Oil Del.
(cu. in./min.@)†
A
(in.)
B
(in.)
C
(in.)
D
(in.)
F
(in.)
G
(in.)
Weight
with
Oil
(lbs.)
0
(psi)
100
(psi)
5,000
(psi)
10,000
(psi)
PE182 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 16 4 3/4 8 7 1/8 6 5 1/8 30

* 2 1/2 gal. reservoir.
** Measured at 3 ft. distance, all sides.
† Typical delivery. Actual flow will vary with field conditions.
†† Special application pumps for cutting, crimping or pressing.



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

More Information
UPC 662536001649
Product Availability In Stock, item availability subject to prior sale.
Manufacturer SPX Power Team
Write Your Own Review
You're reviewing:PE182 SPX Power Team Electric Portable Pump, UPC #662536001649
More from SPX Power Team