100998 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536384858
Part #100998 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity, 5,000 PSI maximum Required, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$826.54
was
$928.70
SKU
100998
100998 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity UPC #662536384858 is available to buy in increments of 1
Part #100998 Hytec Spring Advance Work Supports- 7,500 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 7,500 lb. work supports are available in four different spring advanced models with either conventional or manifold mounting. All use plunger seals to protect against contamination. The spring advance models use Hytec’s diaphragm breather system.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Spring advance models
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order NO. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100998 |
7,500 | 0.25 | Spring | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||
A Retract Operating Range |
B Advance Operating Range |
C | D | |
100998 | 3.435 | 4.185 | 3.500 | 3.875 |
Order No. |
Dimensions (In Inches) | ||||
E |
G Dia. |
X
|
L
|
||
Thread Size |
Dia | ||||
100998 | 3.250 | 1.000 | M12 x 1.5 6H** | - | - |
Order No. |
Dimensions (In Inches) | |||||||
F | H | J | K |
M Thread
|
N |
T Dia |
||
Size |
Depth | |||||||
100998 |
1.625 |
2.000 | 0.875 | 1.250 | M12 x 1.5 6H** | 0.866 | 1.750 | 1.500 |
Order No. |
SPRING ADVANCE WORK SUPPORT | ||
Approximate Forces Required To Depress Plunger (lbs.) |
|||
Fully
|
Extended |
Fully Depressed |
|
100998 | 5.0 | 7.0 |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
110111 Hytec Swing Clamp Surface Mount Externally Plumbed 750LB S/A RH Lower Flange Style. UPC #662536377423Special Price $712.38 was $798.18
-
110114 Hytec Swing Clamp Surface Mount Externally Plumbed 750LB D/A RH Lower Flange Style. UPC #662536377454Special Price $803.67 was $903.00
-
110112 Hytec Swing Clamp Surface Mount Externally Plumbed 750LB S/A S Lower Flange Style. UPC #662536377416Special Price $815.50 was $913.72
-
110096 Hytec Swing Clamp 5000 lbs S/A RH Surface Mount Externally Plumbed Lower Flange UPC #662536373869Special Price $1,095.53 was $1,227.48
-
110099 Hytec Swing Clamp 5000 lbs D/A RH Surface Mount Externally Plumbed Lower Flange UPC #662536373890Special Price $1,206.04 was $1,355.10
-
110113 Hytec Swing Clamp Surface Mount Externally Plumbed 750LB D/A LH Lower Flange Style. UPC #662536377461Special Price $712.38 was $798.18
-
110110 Hytec Swing Clamp Surface Mount Externally Plumbed 750LB S/A LH Lower Flange Style. UPC #662536377430Special Price $712.38 was $798.18