500168 Hytec Clamp Arm Long 365 lbs.UPC #662536369732
Part #500168 Hytec Swing/Pull Clamp Accessories
Swing/Pull Clamp Arms
Hytec offers both short and long arms for each series of “Live-RollerTM” swing/pull clamps. In each case, the short arm (often referred to as the “standard” arm) is designed to be used at pressures up to the clamp's maximum rating of 5000 psi. The long arms are designed to be used as is or easily modified for your applications that require a longer reach. When using the long arms, maximum hydraulic pressure and flow must be reduced. See the accompanying charts. Do not use meter-out circuitry for controlling doubleacting clamp speeds. See pages 105 and 123 for metering valves. Contact Hytec if further design assistance is required.
Rotation Options
Hytec's 2,400 lbs. capacity, 0.500 inch clamping stroke Swing/Pull clamps can be converted to a 30, 45, or 60 degree swing by exchanging the internal cam. Order the appropriate cam from the table to the left. All of Hytec's 2,400 lbs. capacity, 0.500 inch clamping stroke Swing/Pull clamps are also available from the factory with 30, 45, and 60 degree swing options. Contact Hytec for ordering information.
Custom Arm Mounting for Swing/Pull Clamps
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the Hytec arms or some derating of the clamp will be necessary. The design feature allowing the arm to be clamped to the piston rod is recommended for all applications of single and double arms. See the accompanying chart for design details. In applications where there is no bending stress being transferred into the piston rod (like push/pull linkages and equalizing double arms), this design detail may be eliminated. In these applications, the clamp's full capacity (referred to as “straight pull” capacity) is available.
IMPORTANT:
Any clamp using a modified or custom arm that is longer or heavier than Hytec's standard arms must be derated to prevent internal damage. Do not exceed the maximum speed and pressure ratings for Hytec's standard arms. For maximum hydraulic pressure and speed ratings, see the accompanying charts. Do not use meter-out circuitry for controlling double-acting clamp speeds. Contact Hytec if further design assistance is required.
Swing/Pull Clamp Arms
Order No. | Clamp Rating (lbs.) |
Clamp Force with Arm (Max. lbs.) |
Operating Pressure (Max. PSI) |
Max. Flow Rate (cu. in./min.) |
Max. Clamping Speed (Sec.) |
Weight (oz.) |
500168 | 365 | 125* | 2,450* | 8 | 0.5 | 2 |
* Maximum values at supplied lengths. If arm is shortened, see charts under "Performance" |
Order No. | A | B | C Radius |
D | E | F | G | H Radius |
J Thread Size |
500168 | 3.250 | 0.600 | 0.330 | 0.171 | 0.575 | 0.225 | 0.937 | - | - |
Product Availability | Intermittent stocking item, call for specific ship date. Please note, we go into production on some items as soon as we receive your order. It is highly recommended that you place your order as soon as possible. |
---|
-
100916 SPX Hytec Swing/Pull Accessories Nut, Jam, 1 1/4-12 UPC #662536302128Special Price $39.18 was $43.90
-
400001 SPX Hytec Foot Mounting Bracket, 5/8-11 UNC UPC #662536102957Special Price $56.85 was $63.70
-
351816 SPX Hytec Straight Fitting, 7/16-20 F x 5/16-24 M UPC #662536169035Special Price $225.80 was $253.00
-
100980 SPX Hytec Swing/Pull Accessories Nut, Jam, 1 1/16-16 UPC #662536352420Special Price $26.33 was $29.50
-
350398 SPX Hytec Cam, Left Hand 1/2" Stroke UPC #662536160247Special Price $57.92 was $64.90
-
100913 SPX Hytec Swing/Pull Accessories Nut, Jam, 2 1/2-16 UPC #662536275644Special Price $145.48 was $163.00
-
350397 SPX Hytec Cam, Right Hand 1/2" Stroke UPC #662536160230Special Price $63.81 was $71.50