100900 Hytec Swing Clamps Threaded Body Style 5000 lbs. UPC #662536277228

100900 Hytec Swing Clamps Threaded Body Style 5000 lbs. UPC #662536277228

110102 Hytec Swing Clamps, Block, Left, Force 1,610LB. UPC #662536377980 - Side View

110102 Hytec Swing Clamps, Block, Left, Force 1,610LB. UPC #662536377980

110101 Hytec Swing Clamps, Block, Right, Force 1,610LB. UPC #662536377973

Part #110101 Swing Clamps, Block, Right, Force 1,610LB., Single screw mounting, Internal sequence valve.
Special Price $1,766.56 was $1,984.90
SKU
110101
110101 Hytec Swing Clamps, Block, Right, Force 1,610LB. UPC #662536377973 is available to buy in increments of 1

Part #110084 Hytec Swing Clamp 2400LB D/A RH Manifold Mount Lower Flange

Part #110101 Hytec Swing Clamps, Block, Right Hand , Force 1,610LB

 

Single-screw mounting and the adjustable clamping screw make these clamps easy to reposition on the fixture to adapt to various workpiece sizes, and make set-up and adjustment faster than other methods. It also lets you clamp several workpiece sizes without changing the fixture each time. When mounted on a T-slot machine table, the need for fixtures is often eliminated.

Two separate actuators are used to perform the clamping function. First, a cylinder is used to swing the clamping arm 90° into position over the workpiece. Then a second cylinder is sequenced to pivot the clamping arm into contact with the workpiece and hold it in place.

Twelve clamps are available with maximum clamping forces of up to 8,295 lbs.: six with right hand and six with left hand swing. Minimum operating pressure is 500 psi, maximum is 3,500 psi.

 

Features:
  • Single or double-acting
  • Single screw mounting
  • Internal sequence valve
  • Adjustable clamping screw
  • T-slot mountable
  • SAE and NPT ported versions

 

Swing Clamp Modification Information
  • Standard arm may be customized for use in specific applications.
  • Standard clamping arm is 1045 steel heat treated to 38 Rc max.
  • Modified/custom-designed clamping arms must be spring biased or counterweighted so that the arm pivots away from the workpiece.
  • Arms must be stopped such that they do not pivot below the retracted height of the clamping cylinder.

 

Note:
Modified arms may not have the same workpiece clamping force as standard clamps. Clamping force may be calculated by using the dimensions and cylinder force data below. Any clamp using a modified or custom arm that is longer or heavier than the standard arm, must have its flow restricted to prevent internal damage.

 

Order No. Max. *
Clamping
Force
Oil Capacity
(cu. in.)
Min.
Operating
Pressure
(PSI)
Max.
Operating
Pressure
(PSI)
Max.
Clamping
Stroke
(in.)
Max. Flow
Rate
(cu. in./min.)
Max.
Swing
Speed
(Secs.)
Right
Hand
Swing
Advance Return
110101 1610 0.330 0.160 500 3,500 0.310 45 0.250
NOTE: * At 3,500 PSI maximum operating pressure.

 

Swing Clamp Modification Information

Order No. Clamping CylinderEffective Area (Sq. In.)
110101 0.44
* Sequence Pressure 450 psi must be subtracted from System Operating Pressure when calculating Clamping Cylinder Force.

Clamping Cylinder Force (lbs.) = [System Operating Pressure (psi) - 450 psi] x Effective Area (sq. in.)


Order No. Dimensions (In Inches)
H J K **
Retract
Port
L **
Advance
Port
Q
110101 1.250 0.875 7/16-20 UNF
SAE-4
7/16-20 UNF
SAE-4
2.250

 


Order No. Dimensions (In Inches)
E F G M R S
Adjust Range
W
Dia. Depth Min. Max.
110101 3.833 2.875 5.938 1.250 0.257 0.250 0.000 1.500 0.812

Order No. Dimensions (In Inches)
D P
Dia. Depth
110101 2.782 0.257 0.250
NOTE: ** Advance and Retract Ports reversed on Right Hand Swing Clamps.

 

Order No. Dimensions (In Inches)
A B C

N

Dia.

U V T
110101 2.060 1.938 0.938 0.531 2.750 1.375 1.219

 


 

 
 
 
 
Order No. Dimensions (In Inches)
A B C E
110101 2.794 0.375 1.344 0.495
 

 

 

Order No. Dimensions (In Inches)
D
Dia.
F G H
Dia.
110101 0.864 0.488 1.133 0.441

Features:

  • Manifold design eliminates external plumbing and reduces fixture height
  • “Live Roller” design provides industry’s most reliable swing/pull mechanism
  • Piston/Cam combination provides solid path for clamping action
  • Typical ball and groove mechanism has higher potential for clogging and for damage from mis-aligned work pieces
  • Available in single and double acting versions
  • Special rod wiper seal protects internal clamp components
  • Unique drainage system channels contaminants away from clamp
  • Corrosion resistant construction
  • Heat treated, chrome plated piston rod
  • Manifold mountable
  • Unique “Live Roller” swing mechanism for increased service life
  • Power-Tech™ treated body and hardened cam for long wear and corrosion resistance
  • Single- and double-acting models are dimensionally interchangeable
  • Straight pull cap. 3,144 lbs. at 5,000 psi maximum
  • Flange top or bottom mounting

 

Order No. Oper. Swing
Direction
Force *
(lbs.)
Eff. Area
(sq. in.)
Oil Cap.
(cu. in.)
Clamp Unclamp Clamp Unclamp
110084 Double-Acting Straight Pull 2,400 0.626 1.227 0.740 1.460
* With 2.00" long arm at 5,000 psi maximum operating pressure.

 

 

Order No. A
Total
Stroke
B
Clamping
Stroke
C G ‡
Dia.
H
Dia.
J K L M N
Thread
Min.
P
Thread
Size
110084 1.163 0.490 0.104 0.875 1.807 3.419 4.504 6.905 7.335 0.550 1/2-13 UNC
† Do not pressurize - single-acting only.
‡ For Custom Arm Mounting and Maximum Operating Speed, See Swing/Pull Clamp Accessories
Internal cam may be removed for an unguided straight pull.
‡‡Surface finish to be 63. Finish of 125 acceptable with concentric tool marks only. Finish area to be 0.525 dia. min. centered on 0.309 dia. port hole.
See operating instructions for additional port details

 

 

Order No. AA
Dia.
T U V W X Y Z
110084 1.830
1.850
1.024 1.024 2.048 0.625 1.875 1.342 5/16-18 UNC

 

 

Order No. E
Clamp
Port
F
Unclamp
Port
Q
Radius
R S
110084 SAE
O-Ring
SAE
O-Ring
1.630 2.630 2.880
† Do not pressurize - single-acting only.
‡ For Custom Arm Mounting and Maximum Operating Speed, See Swing/Pull Clamp Accessories
Internal cam may be removed for an unguided straight pull.
‡‡Surface finish to be 63. Finish of 125 acceptable with concentric tool marks only. Finish area to be 0.525 dia. min. centered on 0.309 dia. port hole.
See operating instructions for additional port details

 

More Information
Product Availability Intermittent stocking item, call for specific ship date. Please note, we go into production on some items as soon as we receive your order. It is highly recommended that you place your order as soon as possible.
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:110101 Hytec Swing Clamps, Block, Right, Force 1,610LB. UPC #662536377973
More from SPX Hytec