110136 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536391832
Part #110136 Hytec Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
110136 | 7,500 | 0.250 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
110136 | 3.435 | 4.115 | 3.500 | 3.875 | 0.830 | ** G 1/8-28 |
NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
Order No. |
Dimensions (In Inches) | ||||
E | G Dia. |
L | R Port |
S Flats |
|
110136 | 3.250 | 0.500 | 1.500 | ***M12 x 1.6 6H | 0.875 |
NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
Order No. |
Dimensions (In Inches) | |||||||
F | H | J | K | M | N | Q | ||
Size | Depth | |||||||
110136 | 0.875 | 0.438 | 0.875 | 0.625 | ***M12 x 1.5 6H | 0.580 | 1.750 | 0.406 |
NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
AIR ADVANCE WORK SUPPORT | ||
Order No. |
Approximate Plunger Extension Force |
|
Air Pressure * (psi) |
Force (lbs.) |
|
110136 | 100 | 49.0 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. |
Manufacturer | SPX Hytec |
---|
-
100950 Hytec Swing/Pull Clamps - Threaded Body Style - 750 lbs UPC#662536296175Special Price $729.40 was $817.26
-
100952 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296182Special Price $624.78 was $702.00
-
100957 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296212Special Price $644.45 was $724.10
-
100951 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536293143Special Price $624.78 was $702.00
-
100946 Hytec Swing/Pull Clamps - Threaded Body Style - 750 lbs UPC#662536296113Special Price $624.77 was $701.99
-
100953 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296199Special Price $754.95 was $845.88
-
100949 Hytec Swing/Pull Clamps - Threaded Body Style - 750 lbs UPC#662536296168Special Price $630.92 was $708.90