100847 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141154 .jpg

100847 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141154

110135 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536391825 Top View.jpg

110135 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536391825

110088 Hytec Work Support, Air, 7500 lbs. Capacity UPC #662536364966

Part #110088 Work Support, Air, 7500 lbs.Capacity, Air advance, Single-acting, Sealed against contamination, Convenient dual air inlets allow easy connection and chaining of work supports.
Special Price $941.26 was $1,057.60
SKU
110088
110088 Hytec Work Support, Air, 7500 lbs. Capacity UPC #662536364966 is available to buy in increments of 1

Part #1110088 Hytec Work Support, Air, 7500 lbs. Capacity

 

Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.

The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.

Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.

Features:

  • Air advance
  • 7,500 lb. rated capacity at 5,000 psi maximum
  • Single-acting
  • Sealed against contamination
  • Convenient dual air inlets allow easy connection and chaining of work supports


Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting

 

Order
No.
Cap. *
(lbs.)
Oil Cap.
(cu. in.)
Advance
System
Mounting
Configuration
110088 7,500 0.250 Air Conventional
* Based on 5,000 psi maximum operating pressure

 

Order
No.
Dimensions (In Inches)
A
Retract
Operating
Range
B
Advance
Operating
Range
C D O P
Air Inlet
Port
110088 4.435 5.615 4.227 3.875 0.830 1/16 NPTF

 

 

Order
No.
Dimensions (In Inches)
E G
Dia.
L R
Port
S
Flats
110088 3.250 0.500 2.000 7/16-20 UNF
SAE-4
0.875

 

Order
No.
Dimensions (In Inches)
F H J K M N Q
Size Depth
110088 0.875 0.438 0.875 0.625 1/2-13 UNC 0.625 1.750 0.406

 

AIR ADVANCE WORK SUPPORT
Order
No.
Approximate Plunger
Extension Force
Air Pressure *
(psi)
Force
(lbs.)
110088 70 33.0
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi.

 

More Information
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:110088 Hytec Work Support, Air, 7500 lbs. Capacity UPC #662536364966
More from SPX Hytec