110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536364942
Part #110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity, Air advance, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$490.05
was
$549.08
SKU
110086
110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536364942 is available to buy in increments of 1
Part #110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 2,100 lb. air advanced work supports are available in three different models with either conventional or manifold mounting. All use plunger seals to protect against contamination.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Air advance
- 2,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order No. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
110086 | 2,100 | 0.100 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. | Dimensions (In Inches) |
||||||
A Retract Operating Range |
B Advance Operating Range |
C | D | J | N |
P Air Inlet |
|
110086 | 2.250 | 2.625 | 2.250 | 3.542 | 0.875 | 0.685 | 1/8 NPTF |
Order No. | Dimensions (In Inches) | |||
E | G Dia. |
L | Q Port |
|
110086 | 1.750 | 0.500 | 1.375 | 7/16-20 UNF SAE-4 |
Order No. |
Dimensions (In Inches) | |||||
F | H | K |
M Thread |
R Dia. |
||
Size | Depth | |||||
110086 | 0.875 | 0.438 | 0.625 | 1/4-20 UNC | 0.312 | 0.281 |
Order No. | Dimensions (In Inches) | |||||
S | T | U |
V Thread |
W Dia. Air |
Y Dia. |
|
110086 | - | - | - | - | - | - |
Order No. | Dimensions (In Inches) | |
Y | Z | |
110086 | - | - |
AIR ADVANCE WORK SUPPORT | ||
Order No. | Approximate Forces Required To Depress Plunger (lbs.) |
|
Air Pressure * (psi) |
Force (lbs.) |
|
110086 | 50 | 7.1 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 50 psi. |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
100236 Hytec Pressure Gauges UPC #662536005814Special Price $130.39 was $146.50
-
110172 Hytec Coupler Block, Male Half UPC #662536460682Special Price $154.33 was $173.40
-
110048 Hytec Fitting, Air Bleed Valve UPC #662536359146Special Price $24.92 was $28.00
-
100917 Hytec Pressure Gauges UPC #662536310925Special Price $115.88 was $130.20
-
500160 Hytec Threaded Insert, Crowned UPC #662536243674Special Price $25.63 was $28.80
-
253078 Hytec Fitting, Air Bleed Valves UPC #662536109949Special Price $15.89 was $17.81
-
100857 Hytec In-Line Filters UPC #662536207126Special Price $362.05 was $406.80