100884 Hytec Work Supports Spring Advance 4,000 lbs. Capacity UPC #662536254236 Manifold Mount Detail.jpg

100884 Hytec Work Supports Spring Advance 4,000 lbs. Capacity UPC #662536254236

100143-Hytec-Spring-Advance-Work-Supports-1,100-lbs.-Capacity-UPC#662536005319-Side View

100143 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005319

100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623

Part #100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity, Rated capacity at 5,000 psi maximum, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price $963.10 was $1,079.10
SKU
100207
100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623 is available to buy in increments of 1

Part #100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity

 

Hytec's 1,100 lb. capacity work supports use a boot attached between the body and plunger to effectively seal out contaminants. A diaphragm breather system further protects internal components, and the block style design requires only a flat surface for mounting rather than the large threaded hole needed with threaded body designs. Two mounting styles are available for plumbing convenience: manifold and conventional mount.

These work supports use a spring-loaded plunger to minimize deflection and vibration: As the workpiece is loaded into the fixture, it contacts the plunger, and its weight or the design of the fixture holds the plunger depressed. When the work support is hydraulically pressurized, the plunger is locked into position.

 

Features:

  • Spring advance
  • 1,100 lb. rated capacity at 5,000 psi maximum
  • Single-acting
  • Manifold or conventionally mounted styles
  • Sealed against contamination

 


Order No.
Cap. *
 (lbs.)          
Oil Cap.
(cu. in.)
Advance
System
Mounting
Configuration
100207 1,100 0.07 Spring Conventional
* Based on 5,000 psi maximum operating pressure

 

 


Order No.
Dimensions (In Inches)
A
Retract
Operating
Range
B
Advance
Operating
Range
D N
Hex.
100207 2.375 2.670 2.500 1.500

 


Order No.
Dimensions (In Inches)
C E G L X
Thread
Size
Dia.
100207 2.250 1.750 0.375 1.375 1/8 NPTF -

 

 

 

 


Order No.
Dimensions (In Inches)
F H J K

M

Thread

 

T
Dia.
Size   Depth
100207 0.875 0.438 0.730 0.625 10-24 UNC 0.250 0.281

 

 


Order No.
SPRING ADVANCE WORK SUPPORT
Approximate Forces Required
To Depress Plunger (lbs.)
Fully
Extended   
Extended
50%   
Fully
Depressed
100207 1.0 1.4 1.8

 

 

More Information
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623
More from SPX Hytec