10-117-6404 CEJN Quick Disconnect Nipple, 3/8

10-117-6404 CEJN Quick Disconnect Nipple, 3/8" Female NPT Thread, 14503 PSI (1000 bar)

10-125-6202 CEJN Quick Disconnect Nipple, 1/4

10-125-6202 (Discontinued) CEJN Quick Disconnect Nipple, 1/4" Female BSPP Thread, 29007 PSI (2000 bar)

10-125-1202 CEJN Quick Disconnect Coupling, 1/4" Female BSPP Thread, 29007 PSI (2000 bar)

Part #10-125-1202 CEJN Quick Disconnect Coupling, 1/4" Female BSPP Thread, 29007 PSI (2000 bar)
Special Price $99.57 was $111.56
SKU
10-125-1202
10-125-1202 CEJN Quick Disconnect Coupling, 1/4" Female BSPP Thread, 29007 PSI (2000 bar) is available to buy in increments of 1
Series 125 - 29,000 PSI (2000 bar)

Series 125 is a CEJN original with extremely small outside dimensions and a patented seal design. Non-drip connection and disconnection are standard on the CEJN high pressure range. All exposed components are made of zinc plated steel. Plastic dust caps are standard on both the coupling and nipple. The range is primarily recommended for nut runners, bearing pullers, etc.

 

Couplings Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Female thread 10 125 1202 - G 1/4" 64.3 30 24 40-50 CMS*

 

*CMS= Cejn metal seal (120° cone), T1= rubber metal seal (19 950 0061), T2= rubber metal seal (19 950 0062), T3= rubber metal seal (19 950 0063), T4= high strength rubber metal seal (19 950 0083), W= copper washer (09 950 4600).
Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.


Technical data

Nominal flow diameter: 3/32" (2.5 mm)
Flow capacity: 1.5 GPM (5.8 l/min)
Max. working pressure: 29007 PSI (2000 bar)
Min. burst pressure: 58015 PSI (4000 bar)
Temperature range: -22°F — +212°F (-30°C — +100°C)
Material coupling: Hardened, zinc chromate plated steel
Material nipple: Hardened, zinc chromate plated steel
Material seal: Nitrile (NBR) other sealing material on request

Flow capacity is measured at 5.8 PSI (4 bar) pressure drop.

 
Oil Flow
Pressure drop bar (PSI)
Series 125 - 29,000 PSI (2000 bar)
Flow l/m (GPM)



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

More Information
Product Availability Ships in 24-48 Hours, FOB: Point of Origin
Write Your Own Review
You're reviewing:10-125-1202 CEJN Quick Disconnect Coupling, 1/4" Female BSPP Thread, 29007 PSI (2000 bar)
More from