10-807-1204 CEJN Series 807 Couplings Female Thread G 1 1/4

10-807-1204 CEJN Series 807 Couplings Female Thread G 1 1/4" Connection

10-807-1234 CEJN Series 807 Couplings Female Thread G 1 1/4

10-807-1234 CEJN Series 807 Couplings Female Thread G 1 1/4" JIS ORB Connection

10-807-1205 CEJN Series 807 Couplings Female Thread G 1 1/2" Connection

Part #10-807-1205 CEJN Series 807 Couplings Female Thread G 1 1/2" Connection
$0.00
SKU
10-807-1205
10-807-1205 CEJN Series 807 Couplings Female Thread G 1 1/2" Connection is available to buy in increments of 1
Series 807 - 1 ¼”

 TLX is a flat-face twist lock coupling for the toughest applications in the construction and demolition segment. This super-duty quick connect coupling is designed to work with the highest surge flows and the toughest pressure impulses. TLX is made from high alloy steels with Zinc-Nickel surface treatment for a long life in the harshest conditions. The Series is available in sizes from ¾” to 1 ¼” to cover most applications.


The couplings and nipples are also available in 2 other sizes: ¾” (Series 607) and 1” (Series 707)

Couplings Part No. Connection
Female thread 10 807 1205 G 1 1/2"

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Technical data
Flow rate: 400 l/min (88.0 GPM) @ 3bar ΔP **
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material coupling: High alloy steels with Zinc-Nickel surface
Material nipple: High alloy steels with Zinc-Nickel surface
Material seal: Nitrile (NBR)
Connectability: Connection with residual pressure only limited by operator strength
Max. working pressure connected: 400 bar (5801 PSI)
Max. working pressure disconnected: 330 bar (4786 PSI)
Min. burst pressure connected: 1600 bar (23206 PSI)
Min. burst pressure disconnected: 1000 bar (14503 PSI)
Disconnection under pressure: Disconnection with residual pressure in the system is allowed

(**) - If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.

Pressure drop chart
Series 807 - 1 ¼”

 



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

Write Your Own Review
You're reviewing:10-807-1205 CEJN Series 807 Couplings Female Thread G 1 1/2" Connection
More from