10-364-6204 Nipples With Pressure Eliminator Female Thread G 3/8

10-364-6204 Nipples With Pressure Eliminator Female Thread G 3/8"(BSP) Connection

10-364-6294 Nipples With Pressure Eliminator Female Thread G 3/8

10-364-6294 Nipples With Pressure Eliminator Female Thread G 3/8"JIS ORB Connection

10-364-6205 Nipples With Pressure Eliminator Female Thread G 1/2"(BSP) Connection

Part #10-364-6205 Nipples With Pressure Eliminator Female Thread G 1/2"(BSP) Connection
$0.00
SKU
10-364-6205
10-364-6205 Nipples With Pressure Eliminator Female Thread G 1/2"(BSP) Connection is available to buy in increments of 1
Series 364, DN10 Pressure Eliminator
  • Flat-Face design
  • Connection under pressure
  • One-hand operation

CEJN Series 364 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 364 connects with couplings in Series 365, Series 366 and Series 362.

The pressure eliminator nipples are also available in four other sizes; DN 6.3 (Series 264), DN 12.5 (Series 564), DN 16 (Series 664), DN 19 (Series 764). For steel couplings in accordance with ISO 16028 see Series 365. Stainless steel versions of the standard are available in Series 366. Series 362 features an interchangeable steel coupling designed for lower pressures.
 
Nipples with pressure eliminator Part No. Connection Length Diameter Hexagon Seal
  Female thread 10 364 6205 G 1/2" (BSP) 79.3 30.2 27 NBR/PUR
 
Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
 
Technical data
Temperature range: -22°F — +212°F (-30°C — +100°C)
Material nipple: Hardened steel (zinc passivation)
Material seal: Nitrile (NBR/PUR)
Connectability: With static pressure up to 400 bar on the nipple side
Disconnection under pressure: Not allowed
Max. working pressure connected: 400 bar (5801 PSI)
Max. working pressure disconnected: 400 bar (5801 PSI)
Min. burst pressure connected: 1200 bar (17404 PSI)
Min. burst pressure disconnected: 1200 bar (17404 PSI)
Comment: Connects with couplings from Series 365, Series 366 and Series 362
Interchangeable with: All brands dimensionally interchanging with ISO16028

Rated flow is measured at 14.5 PSI pressure drop.
Approved to max working pressure
Max working pressure 3626 PSI (250 bar) according to ISO 16028

Pressure drop chart
Pressure drop, PSI
Series 364, DN10 Pressure Eliminator
Flow, GPM
Flow measured with coupling Series 365



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

Write Your Own Review
You're reviewing:10-364-6205 Nipples With Pressure Eliminator Female Thread G 1/2"(BSP) Connection
More from