10-665-6601 CEJN Quick Disconnect Nipple, Female Thread NBR Connection

10-665-6601 CEJN Quick Disconnect Nipple, Female Thread NBR Connection

10-764-6403 CEJN Quick Disconnect Nipple, 1

10-764-6403 CEJN Quick Disconnect Nipple, 1" Female Thread NPT Connection

10-764-6401 CEJN Quick Disconnect Nipple With Pressure Release Valve, 3/4" Female Thread NPT Connection

Part #10-764-6401 CEJN Quick Disconnect Nipple With Pressure Release Valve, 3/4" Female Thread NPT Connection
Special Price $116.56 was $130.60
SKU
10-764-6401
10-764-6401 CEJN Quick Disconnect Nipple With Pressure Release Valve, 3/4" Female Thread NPT Connection is available to buy in increments of 1
Series 764, DN19 Pressure Eliminator
  • Flat-Face design
  • Connection under pressure
  • One-hand operation
CEJN Series 764 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 764 connects with couplings in Series 765 and Series 766

The pressure eliminator nipples are also available in four smaller sizes; DN 6.3 (Series 264), DN 10 (Series 364), DN 12.5 (Series 564) and DN 16 (Series 664). For steel couplings in accordance with ISO 16028 see Series 765. Stainless steel versions of the standard are available in Series 766.

Nipples with pressure eliminator Part No. Connection Length Diameter Hexagon Seal
Female thread 10 764 6401 3/4" NPT 130.5 46 41 NBR

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Technical data
Temperature range: -22°F — +212°F (-30°C — +100°C)
Material nipple: Hardened steel (zinc passivation)
Material seal: Nitrile (NBR/PUR)
Connectability: With static pressure up to 400 bar on the nipple side
Disconnection under pressure: Not allowed
Max. working pressure connected: 400 bar (5801 PSI)
Max. working pressure disconnected: 400 bar (5801 PSI)
Min. burst pressure connected: 1200 bar (17404 PSI)
Min. burst pressure disconnected: 1200 bar (17404 PSI)
Comment: Connects with couplings from Series 765 and Series 766
Interchangeable with: All brands dimensionally interchanging with ISO16028

Rated flow is measured at 0.1 MPa pressure drop.
Approved to max working pressure
Max working pressure 3630 PSI (250 bar) according to ISO 16028

Pressure drop chart
Pressure drop, PSI
Series 764, DN19 Pressure Eliminator
Flow, GPM
Flow measured with coupling Series 765



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

More Information
Product Availability Ships in 24-48 Hours, FOB: Point of Origin
Write Your Own Review
You're reviewing:10-764-6401 CEJN Quick Disconnect Nipple With Pressure Release Valve, 3/4" Female Thread NPT Connection
More from