10-665-6201 CEJN Series 665, Nipples Female Thread G 3/4

10-665-6201 CEJN Series 665, Nipples Female Thread G 3/4" (BSP) Connection

10-665-6752 CEJN Series 665, Nipples Male Thread 1

10-665-6752 CEJN Series 665, Nipples Male Thread 1"-14 ORFS Bulkhead Connection

10-665-6551 CEJN Series 665, Nipples Male Thread M26x1.5 18L Connection

Part #10-665-6551 CEJN Series 665, DN16 Steel Nipples Male Thread M26x1.5 18L Connection
$0.00
SKU
10-665-6551
10-665-6551 CEJN Series 665, Nipples Male Thread M26x1.5 18L Connection is available to buy in increments of 1
Series 665, DN16 Steel
  • Flat-Face design
  • One-hand operation
  • Extra locking security
CEJN Series 665 is a Flat-Face quick-connect coupling according to and exceeding the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. Series 665 couplings require only one hand for operation, making connection and disconnection fast and easy. Dust caps are available as accessories for both the coupling and nipple when disconnected to prevent dust and debris from entering the system. Series 665 couplings feature manual security locking as added protection against involuntary disconnection.

The couplings and nipples are also available in other sizes; DN 5 (Series 165), DN 6.3 (Series 265), DN 10 (Series 365), DN 12.5 (Series 565), DN 19 (Series 765), DN 25 (Series 065). Nipples with pressure eliminator available under Series 664.

Nipples Part No. Connection Length Diameter Hexagon Seal
Male thread 10 665 6551 M26x1.5 18L 76 40 36 PUR

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Technical data
Temperature range: -22°F — +212°F (-30°C — +100°C)
Material coupling: Steel (zinc passivation)
Material nipple: Hardened steel (zinc passivation)
Material seal: Nitrile (NBR/PUR, other sealing materials on request)
Connectability: Only limited by operator strength
Max. working pressure connected: 400 bar (5801 PSI)
Max. working pressure disconnected: 400 bar (5801 PSI)
Min. burst pressure connected: 1200 bar (17404 PSI)
Min. burst pressure disconnected: 1200 bar (17404 PSI)
Disconnection under pressure: Not allowed
Interchangeable with: All brands dimensionally interchanging with ISO16028
 
Rated flow is measured at 14.5 PSI pressure drop.
 
Pressure drop chart
Pressure drop, PSI
Series 665, DN16 Steel
Flow, GPM



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

Write Your Own Review
You're reviewing:10-665-6551 CEJN Series 665, Nipples Male Thread M26x1.5 18L Connection
More from