9632 SPX Power Team Post-Tensioning Multi-Strand UPC #662536181808

Part #9632 SPX Power Team Post-Tensioning Multi-Strand, 13.6 lbs.
Special Price $2,517.81 was $2,829.00
SKU
9632-662536181808

SPX Power Team Post-Tensioning Multi-Strand

“TWIN” 4-WAY/3-POSITION (TANDEM CENTER) MANUAL VALVE

Application – Multi-strand, double-acting stressing jacks with an auxiliary seating cylinder.

Actuation – Dual lever operated, detent positioned.

Operation

  1. With valves “A” and “B” in center position, pump is started; cable is inserted into stressing tool.
  2. Valve “A” is placed in “Stress” position; cylinder extends to tension cable. Pump pressure controls force exerted by tensioning cylinder in this position. “Stress” port is checked internally, and can only be released by building pressure in the valve “B” return position.
  3. When desired cable tension is achieved, valve “A” is placed in valve “B” position and valve “B” in “Seat” position. Seating portion of cylinder will be pressurized to seating pressure controlled by “Seat” relief valve (factory set to 3,900 psi).
  4. Valve “B” is shifted to “Return” position, which is pressure controlled and will not exceed 2,200 psi. “Return” portion of stressing tool should be pressurized and will release “Stress” port when pressure reaches 15% of “Stress” port pressure.
  5. “Stress” port will remain open and cylinder will return as long as pressure differential is maintained. “Stress” and “Seat” ports are open to reservoir.
  6. When cylinder has fully returned, both valves are shifted to “Center” position and oil will be directed to reservoir. Maximum pressure setting for the “Seat” relief valve is 6,000 psi.

Used on these pumps: PA17*, PA46*, PA55, PE17*, PE21*, PE30, PE46*, PE55, PE84, PE120, PE200, PE400, PG30*, PG55, PG120, PG400, PQ60 and PQ120 series.*

* These pumps may have reduced first flow stage characteristics due to internal valve restrictions.

CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.

IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.

IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required.
For valves 9504, 9584, 9610 and 9610A, order four 12001 cap screws.
For valve 9582, order two 12001 and two 10856 cap screws.

Order No.Cylinder
Application *
OperationValve TypeVoltAdvance/ ReturnAdvance / Hold ReturnPosi-Check FeatureWeight (lbs.)
9632 S.A. & D.A. Manual Post Tensioning Special No No 13.6


* “S.A.” represents single-acting cylinders, “D.A.” represents double-acting cylinders



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

More Information
Product Availability Intermittent stocking item, call for specific ship date. Please note, we go into production on some items the second you place your order. It is highly recommended that you place your order as soon as possible.
Manufacturer SPX Power Team
Write Your Own Review
You're reviewing:9632 SPX Power Team Post-Tensioning Multi-Strand UPC #662536181808
More from SPX Power Team