10-262-6404 CEJN Nipples Female Thread 3/8

10-262-6404 CEJN Nipples Female Thread 3/8" NPT Connection

10-264-6554 CEJN Nipples With Pressure Eliminator Male Thread M14x1.5 08L Connection

10-264-6554 CEJN Nipples With Pressure Eliminator Male Thread M14x1.5 08L Connection

10-264-6202 CEJN Nipples With Pressure Eliminator Female Thread G 1/4" (BSP) Connection

Part #10-264-6202 CEJN Nipples With Pressure Eliminator Female Thread G 1/4" (BSP) Connection
$0.00
SKU
10-264-6202
10-264-6202 CEJN Nipples With Pressure Eliminator Female Thread G 1/4" (BSP) Connection is available to buy in increments of 1
Series 264, DN6.3 Pressure Eliminator
  • Flat-Face design
  • Connection under pressure
  • One-hand operation
CEJN Series 264 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 264 connects with couplings in Series 265, Series 266 and Series 262.

The pressure eliminator nipples are also available in four other sizes; DN 10 (Series 364), DN 12.5 (Series 564), DN 16 (Series 664), DN 19 (Series 764). For steel couplings in accordance with ISO 16028 see Series 265. Stainless steel versions of the standard are available in Series 266. Series 262 features an interchangeable steel coupling designed for lower pressures.

Nipples with pressure eliminator Part No. Connection Length Diameter Hexagon Seal
 Female thread 10 264 6202 G 1/4" (BSP) 74.4 25.2 21 NBR

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Technical data
Temperature range: -22°F — +212°F (-30°C — +100°C)
Material nipple: Hardened steel (zinc passivation)
Material seal: Nitrile (NBR/PUR)
Connectability: With static pressure up to 400 bar on the nipple side
Disconnection under pressure: Not allowed
Max. working pressure connected: 500 bar (7251 PSI)
Max. working pressure disconnected: 500 bar (7251 PSI)
Min. burst pressure connected: 1500 bar (21755 PSI)
Min. burst pressure disconnected: 1500 bar (21755 PSI)
Comment: Connects with couplings from Series 265, Series 266 and Series 262
Interchangeable with: All brands dimensionally interchanging with ISO16028

Rated flow is measured at 14.5 PSI pressure drop.
Approved to max working pressure
Max working pressure 4569 PSI (315 bar) according to ISO 16028

Pressure drop chart
Pressure drop, PSI
Series 264, DN6.3 Pressure Eliminator
Flow, GPM
Flow measured with coupling Series 265



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

Write Your Own Review
You're reviewing:10-264-6202 CEJN Nipples With Pressure Eliminator Female Thread G 1/4" (BSP) Connection
More from