10-116-3666 CEJN Quick Disconnect 116 Series T-Connection With 3 Nipples, 150.0 MPa

10-116-3666 CEJN Quick Disconnect 116 Series T-Connection With 3 Nipples, 150.0 MPa

10-117-1232 CEJN Quick Disconnect Coupling, 1/4

10-117-1232 CEJN Quick Disconnect Coupling, 1/4" Female Thread, 14503 PSI (1000 bar)

10-116-5252 CEJN Quick Disconnect Nipple Without Valve, Male thread, 21755 PSI (1500 bar)

Part #10-116-5252 CEJN Quick Disconnect Nipple Without Valve, Male thread, 21755 PSI (1500 bar)
Special Price $30.92 was $34.65
SKU
10-116-5252
10-116-5252 CEJN Quick Disconnect Nipple Without Valve, Male thread, 21755 PSI (1500 bar) is available to buy in increments of 10
Series 116 - 21,750 PSI (1500 bar)

 

Series 116 is available in both standard and Flat-Face designs. The Series is a CEJN original with extremely small outside dimensions. Non-drip connection and disconnection are standard on the CEJN High-Pressure range. All exposed components are made of zinc-plated steel. The coupling is also available in a design with a safety ring for the locking sleeve to prevent accidental disconnection. Plastic dust caps are standard on both coupling and nipple, dust caps of aluminum can be ordered separately. There is a coupling and nipple manufactured of stainless steel and chemically nickel-plated steel available for use in corrosive environments. A coupling with a 90° angled swivel connection is also available for use in confined areas. The range is primarily recommended for cylinders, bolt tensioner tools, bearing pullers, etc.

 

Nipples without valve Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Male thread 10 116 5252 - G 1/4" 40.5 25.4 22 80-90 W*

 

*CMS= Cejn metal seal (120° cone), T1= rubber metal seal (19 950 0061), T2= rubber metal seal (19 950 0062), T3= rubber metal seal (19 950 0063), T4= high strength rubber metal seal (19 950 0083), W= cupper washer (09 950 4600).
Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.


Technical data
Nominal flow diameter: 3/32" (2.5 mm)
Flow capacity: 1.6 GPM (6.0 l/min)
Max. working pressure: 21755 PSI (1500 bar)
Min. burst pressure: 43511 PSI (3000 bar)
Temperature range: -22°F — +212°F (-30°C — +100°C)
Material coupling: Hardened, zinc chromate plated steel
Material nipple: Hardened, zinc chromate plated steel
Material seal: Nitrile (NBR) other sealing material on request

Flow capacity is measured at 50 PSI (1.47 GPM) pressure drop.

 

Oil Flow
Pressure drop, PSI
Series 116 - 21,750 PSI (1500 bar)
Flow GPM

 



***Please Note: Item Photos above are for General Reference and may not always be exact. Please see the product description and quick overview section for complete listing of item details and any additional components and specifications***

More Information
Product Availability Intermittent stocking Item. Call for current lead-time. Special Order item, non-cancelable and non-returnable.
Manufacturer CEJN
Write Your Own Review
You're reviewing:10-116-5252 CEJN Quick Disconnect Nipple Without Valve, Male thread, 21755 PSI (1500 bar)
More from CEJN